On 2016-05-10 10:07, Alan Somers wrote: > On Tue, May 10, 2016 at 8:59 AM, Larry Rosenman <l...@lerctr.org> wrote: > > On 2016-05-10 09:56, Alan Somers wrote: > > On Tue, May 10, 2016 at 8:28 AM, Larry Rosenman <l...@lerctr.org> wrote: > Is there work going on to silence this when the cd drive is empty? > > May 10 09:26:46 thebighonker devd: Processing event '!system=CAM > subsystem=periph type=error device=cd0 serial="" cam_status="0xcc" > scsi_status=2 scsi_sense="70 02 3a 01" CDB="00 00 00 00 00 00 " ' > May 10 09:27:16 thebighonker last message repeated 10 times > > thebighonker.lerctr.org [1] /home/ler $ uname -aKU > FreeBSD thebighonker.lerctr.org [1] 10.3-STABLE FreeBSD 10.3-STABLE #40 > r299365: Tue May 10 09:14:53 CDT 2016 > r...@thebighonker.lerctr.org:/usr/obj/usr/src/sys/GENERIC amd64 1003501 > 1003501 > thebighonker.lerctr.org [1] /home/ler $ > > Yes. In the long term, scottl is trying to quell messages like that. In the > short term, you can easily silence it with /etc/syslog.conf rules. In fact, > it shouldn't even there with the default syslog.conf. Have you modified > yours? Can you please share the modifications? > > -Alan
# $FreeBSD: stable/10/etc/syslog.conf 260519 2014-01-10 17:56:23Z asomers $ # # Spaces ARE valid field separators in this file. However, # other *nix-like systems still insist on using tabs as field # separators. If you are sharing this file between systems, you # may want to use only tabs as field separators here. # Consult the syslog.conf(5) manpage. *.err;kern.warning;auth.notice;mail.crit /dev/console *.info;authpriv.none;kern.debug;lpr.info [2];mail.crit;news.err;cron.none;local0.none;local1.none /var/log/messages security.* /var/log/security auth.info [3];authpriv.info [4] /var/log/auth.log #auth.info [3];authpriv.info [4] |exec /usr/local/sbin/sshit mail.info [5] /var/log/maillog mail.debug /var/log/debug.maillog local1.* /var/log/cisco.log lpr.info [2] /var/log/lpd-errs ftp.info [6] /var/log/xferlog cron.* /var/log/cron # Uncomment this if you wish to see messages produced by devd #!devd #*.>=notice /var/log/devd.log *.=debug /var/log/debug.log *.emerg * # uncomment this to log all writes to /dev/console to /var/log/console.log console.info [7] /var/log/console.log # uncomment this to enable logging of all log messages to /var/log/all.log # touch /var/log/all.log and chmod it to mode 600 before it will work *.* /var/log/all.log # uncomment this to enable logging to a remote loghost named loghost #*.* @loghost # uncomment these if you're running inn #news.crit /var/log/news/news.crit #news.err /var/log/news/news.err #news.notice /var/log/news/news.notice local0.* /var/log/pg-prod.log #!startslip #*.* /var/log/slip.log #!ppp #*.* /var/log/ppp.log The messages you're seeing are printed by devd at loglevel info, and I see that you're directing *.info to /var/log/messages. If you change that to the default "*.notice" then you won't see the offending messages, or if you prefix the line with "!-devd" like this: !-devd *.info;authpriv.none;kern.debug;lpr.info [2];mail.crit;news.err;cron.none;local0.none;local1.none /var/log/messages In the latter case, I recommend that you enable /var/log/devd.log at level notice. -Alan Done and THANKS. thebighonker.lerctr.org /home/ler $ cat /etc/syslog.conf # $FreeBSD: stable/10/etc/syslog.conf 260519 2014-01-10 17:56:23Z asomers $ # # Spaces ARE valid field separators in this file. However, # other *nix-like systems still insist on using tabs as field # separators. If you are sharing this file between systems, you # may want to use only tabs as field separators here. # Consult the syslog.conf(5) manpage. *.err;kern.warning;auth.notice;mail.crit /dev/console !-devd *.info;authpriv.none;kern.debug;lpr.info;mail.crit;news.err;cron.none;local0.none;local1.none /var/log/messages security.* /var/log/security auth.info;authpriv.info /var/log/auth.log #auth.info;authpriv.info |exec /usr/local/sbin/sshit mail.info /var/log/maillog mail.debug /var/log/debug.maillog local1.* /var/log/cisco.log lpr.info /var/log/lpd-errs ftp.info /var/log/xferlog cron.* /var/log/cron # Uncomment this if you wish to see messages produced by devd !devd *.>=notice /var/log/devd.log *.=debug /var/log/debug.log *.emerg * # uncomment this to log all writes to /dev/console to /var/log/console.log console.info /var/log/console.log # uncomment this to enable logging of all log messages to /var/log/all.log # touch /var/log/all.log and chmod it to mode 600 before it will work *.* /var/log/all.log # uncomment this to enable logging to a remote loghost named loghost #*.* @loghost # uncomment these if you're running inn #news.crit /var/log/news/news.crit #news.err /var/log/news/news.err #news.notice /var/log/news/news.notice local0.* /var/log/pg-prod.log #!startslip #*.* /var/log/slip.log #!ppp #*.* /var/log/ppp.log thebighonker.lerctr.org /home/ler $ -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 214-642-9640 E-Mail: l...@lerctr.org US Mail: 17716 Limpia Crk, Round Rock, TX 78664-7281 Links: ------ [1] http://thebighonker.lerctr.org [2] http://lpr.info [3] http://auth.info [4] http://authpriv.info [5] http://mail.info [6] http://ftp.info [7] http://console.info _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
