On Sun, Jul 29, 2018 at 4:43 AM, Stefan Bethke <s...@lassitu.de> wrote:
> Folks, > > my ZIL/cache SSD apparently just died. Rebooting the system with the SATA > M.2 SSD hung, so I removed the card from the system. > > On powerup, loader acts normally, all four SATA disks (main Raid-Z1 > devices) are all probed successfully, but mount root fails: > > ZFS filesystem version: 5 > ZFS storage pool version: features support (5000) > Timecounters tick every 1.000 msec > ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 > ada0: <TOSHIBA MD04ACA50D FS2A> ATA8-ACS SATA 3.x device > ada0: Serial Number Z5Q7K0RIFFRC > ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) > ada0: Command Queueing enabled > ada0: 4769307MB (9767541168 512 byte sectors) > ada1 at ahcich2 bus 0 scbus2 target 0 lun 0 > ada1: <TOSHIBA MD04ACA50D FS2A> ATA8-ACS SATA 3.x device > ada1: Serial Number Y5PIK0A2FFRC > ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) > ada1: Command Queueing enabled > ada1: 4769307MB (9767541168 512 byte sectors) > ada2 at ahcich3 bus 0 scbus3 target 0 lun 0 > ada2: <TOSHIBA MD04ACA50D FS2A> ATA8-ACS SATA 3.x device > ada2: Serial Number 36D2K0VZFFRC > ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) > ada2: Command Queueing enabled > ada2: 4769307MB (9767541168 512 byte sectors) > ada3 at ahcich4 bus 0 scbus4 target 0 lun 0 > ada3: <TOSHIBA MD04ACA50D FS2A> ATA8-ACS SATA 3.x device > ada3: Serial Number Z5SDK0J3FFRC > ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) > ada3: Command Queueing enabled > ada3: 4769307MB (9767541168 512 byte sectors) > pass4 at ahciem0 bus 0 scbus6 target 0 lun 0 > pass4: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device > Trying to mount root from zfs:p2/be/11 []... > GEOM_MIRROR: Device mirror/p2swap launched (4/4). > random: unblocking device. > Mounting from zfs:p2/be/11 failed with error 6; retrying for 3 more seconds > Mounting from zfs:p2/be/11 failed with error 6. > > Loader variables: > vfs.root.mountfrom=zfs:p2/be/11 > > Manual root filesystem specification: > <fstype>:<device> [options] > Mount <device> using filesystem <fstype> > and with the specified (optional) option list. > > eg. ufs:/dev/da0s1a > zfs:tank > cd9660:/dev/cd0 ro > (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /) > > ? List valid disk boot devices > . Yield 1 second (for background tasks) > <empty line> Abort manual input > > mountroot> > > Is there an easy way to boot into single user mode and remove the > ZIL/cache devices that are not there anymore? Or do I need a USB key to > boot off of and zfs import the pool first? > > > Thanks, > Stefan > > -- > Stefan Bethke <s...@lassitu.de> Fon +49 151 14070811 A missing L2ARC is no problem, but a missing ZIL may mean filesystem corruption. Hopefully the ZIL was empty when it failed. I would try booting from ZFS and removing the offending device. Good luck. -Alan _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"