Hi!
Long story short: 11.2-STABLE/amd64 r335757 leaked over 4600MB kernel wired
memory over 81 days uptime
out of 8GB total RAM.
Details follow.
I have a workstation running Xorg, Firefox, Thunderbird, LibreOffice and
occasionally VirtualBox for single VM.
It has two identical 320GB HDDs combined with single graid-based array with
"Intel"
on-disk format having 3 volumes:
- one "RAID1" volume /dev/raid/r0 occupies first 10GB or each HDD;
- two "SINGLE" volumes /dev/raid/r1 and /dev/raid/r2 that utilize "tails" of
HDDs (310GB each).
/dev/raid/r0 (10GB) has MBR partitioning and two slices:
- /dev/raid/r0s1 (8GB) is used for swap;
- /dev/raid/r0s2 (2GB) is used by non-redundant ZFS pool named "os" that
contains only
root file system (177M used) and /usr file system (340M used).
There is also second pool (ZMIRROR) named "z" built directly on top of
/dev/raid/r[12] volumes,
this pool contains all other file systems including /var, /home, /usr/ports,
/usr/local, /usr/{src|obj} etc.
# zpool list
NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP HEALTH
ALTROOT
os 1,98G 520M 1,48G - - 55% 25% 1.00x ONLINE -
z 288G 79,5G 209G - - 34% 27% 1.00x ONLINE -
This way I have swap outside of ZFS, boot blocks and partitioning mirrored by
means of GEOM_RAID and
can use local console to break to single user mode to unmount all file system
other than root and /usr
and can even export bigger ZFS pool "z". And I did that to see that ARC usage
(limited with vfs.zfs.arc_max="3G" in /boot/loader.conf) dropped from over
2500MB
down to 44MB but "Wired" stays high. Now after I imported "z" back and booted
to multiuser mode
top(1) shows:
last pid: 51242; load averages: 0.24, 0.16, 0.13 up 81+02:38:38 22:59:18
104 processes: 1 running, 103 sleeping
CPU: 0.0% user, 0.0% nice, 0.4% system, 0.2% interrupt, 99.4% idle
Mem: 84M Active, 550M Inact, 4K Laundry, 4689M Wired, 2595M Free
ARC: 273M Total, 86M MFU, 172M MRU, 64K Anon, 1817K Header, 12M Other
117M Compressed, 333M Uncompressed, 2.83:1 Ratio
Swap: 8192M Total, 940K Used, 8191M Free
I have KDB and DDB in my custom kernel also. How do I debug the leak further?
I use nvidia-driver-340-340.107 driver for GK208 [GeForce GT 710B] video card.
Here are outputs of "vmstat -m":
http://www.grosbein.net/freebsd/leak/vmstat-m.txt
and "vmstat -z": http://www.grosbein.net/freebsd/leak/vmstat-z.txt
as well as "sysctl hw": http://www.grosbein.net/freebsd/leak/sysctl-hw.txt
and "sysctl vm": http://www.grosbein.net/freebsd/leak/sysctl-vm.txt
_______________________________________________
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
