Patrick M. Hausen wrote on 2019/05/09 09:46:
Hi all,
Am 09.05.2019 um 00:55 schrieb Michelle Sullivan <miche...@sorbs.net>:
No, one disk in the 16 disk zRAID2 ... previously unseen but it could be the
errors have occurred in the last 6 weeks... everytime I reboot it started
resilvering, gets to 761M resilvered and then stops.
16 disks in *one* RAIDZ2 vdev? That might be the cause of your insanely
long scrubs. In general it is not recommended though I cannot find the
source for that information quickly just now.
Extremely slow scrub is an issue even on 4 disks RAIDZ. I already posted
about it in the past. This scrub is running from Sunday 3AM.
Time to go is big lie. Is was "19hXXm" 12 hour ago.
pool: tank0
state: ONLINE
scan: scrub in progress since Sun May 5 03:01:48 2019
10.8T scanned out of 12.7T at 30.4M/s, 18h39m to go
0 repaired, 84.72% done
config:
NAME STATE READ WRITE CKSUM
tank0 ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
gpt/disk0tank0 ONLINE 0 0 0
gpt/disk1tank0 ONLINE 0 0 0
gpt/disk2tank0 ONLINE 0 0 0
gpt/disk3tank0 ONLINE 0 0 0
Disks are OK, monitored by smartmontools. There is nothing odd, just the
long long scrubs. This machine was started with 4x 1TB (now 4x 4TB) and
scrub was slow with 1TB disks too. This machine - HP ML110 G8) was my
first machine with ZFS. If I remember it well it was FreeBSD 7.0, now
running 11.2. Scrub was / is always about one week. (I tried some sysctl
tuning without much gain)
Miroslav Lachman
_______________________________________________
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
