if there is more rigorous testing of the new code would it be possible for the commit to make it into 12.2?
On Wed, Oct 7, 2020, 23:56 sreehari <sreeharisreed...@gmail.com> wrote: > I see. Since I have the hardware and freebsd head seems broken on my > laptop, I'll try compiling stable/12 with the ure patch from head within > the next few days. I have gigabit internet and other machines to test the > ethernet with the full 1000Mbps. Are there any actions you suggest I take > to benchmark or stress test the hardware or make sure everything is working > properly? > > On Wed, Oct 7, 2020, 23:36 John-Mark Gurney <j...@funkthat.com> wrote: > >> Kurt Jaeger wrote this message on Thu, Oct 08, 2020 at 06:36 +0200: >> > > sreehari wrote this message on Tue, Oct 06, 2020 at 21:02 -0700: >> > > > I have a USB C hub that supports gigabit ethernet under any other >> OS, >> > > > but under FreeBSD it seems to detect it properly, but I never get >> > > > speeds exceeding 100Mbps transfer rate on the whole thing. Is this a >> > > > known issue? Also is there any way to check what the perceived link >> > > > speed is? I've attached dmesg.boot if that helps. >> > > >> > > This is a known issue w/ the ure driver on FreeBSD. This has been >> > > fixed in -current, and in a few months I'll look at merging it to >> > > stable/12, but it definitly will not make the 12.2 release: >> > > https://reviews.freebsd.org/D25809 >> > >> > The changes seem to be limited to the driver itself -- is some >> > structural change in 13 stopping a merge to 12.2 ? >> >> The issue is that IMO, it's too close to the release of 12.2. It only >> recently got committed to 13, and so hasn't had enough time to be tested >> in more environments than mine. There have been a few others that have >> tested it. >> >> -- >> John-Mark Gurney Voice: +1 415 225 5579 >> >> "All that I will do, has been done, All that I have, has not." >> > _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
