On Mon, Mar 22, 2021 at 8:19 AM Adrian Chadd <adrian.ch...@gmail.com> wrote:
> On Mon, 15 Mar 2021 at 14:58, Kevin Oberman <rkober...@gmail.com> wrote: > > > > > > > It appears that the messages are associated with reading > > > the disk(s), not directly with writing them, where the > > > reads take more than "hz * 20" time units to complete. > > > (I'm looking at main (14) code.) What might contribute > > > to the time taken for the pending read(s)? > > > > > The reference to hz * 20 woke up a few sleeping memory cells. I forgot > that > > I cleaned up my loader.conf. It was largely a copy of the one on my > > decade-old T520. I commented out "kern.hz=100". I don't recall the > details, > > but I think it was actually from an even older system, my T42 from > before I > > retired. > > > > In any case, restoring this setting has greatly improved the situation. I > > now have really bad disk I/O performance on large disk to disk activity > > (untarring the firefox distro) instead of terrible performance and the > > system freezes have vanished, though I do see pauses in response to > clicks > > or text entry, but the display remains active and the pauses are > short... 1 > > to 15 seconds, I'd guess. No, I have no idea what this indicates. > > ... which drive controller is this? Is it just a laptop ATA disk? > > > I'm still not seeing the performance I was seeing back in February when > 40 > > MB/s for extended intervals was common and I once untarred > firefox.tar.gz2 > > in under a minute and performance seldom dropped below 1.4 MB/s. > > Did you find a resolution? I wonder if setting kern.hz is kicking > some process(es) to get some time more frequently due to bugs > elsewhere in the system (interrupts, IPI handling, wake-ups, etc) > > > > -adrian > No resolution. This is a Lenovo L15 ThinkPad with a 2TB ATAPI drive. The current drive is a Seagate. All testing has been done since I got it back from Lenovo in late January. I can read or write the drive at reasonable rates that exceed 50 MB/s. Extracting a tar distribution file is painful. I have had firefox extracts take over a half hour. Worse, if I do other operations while the extract is taking place, I often see a 30 second (and, occasionally 60 second) display freezes as well as log reports that of "swap_pager: indefinite wait buffer:" This is a bit odd as I have 20G of RAM and am pretty close to no swap space activity, but, of course, paging does occur. This system is CometLake and graphics are not supported on 12. I am not absolutely sure that there is not a hardware issue even though the main board, the disk, and the keyboard/mouse pad have all been replace since I received the system back last June. I now wonder what else could go wrong. -- Kevin Oberman, Part time kid herder and retired Network Engineer E-mail: rkober...@gmail.com PGP Fingerprint: D03FB98AFA78E3B78C1694B318AB39EF1B055683 _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"