On Sun, Feb 11, 2001 at 09:13:59AM +0200, Danny Braniss wrote:
FWIW: My 29160 works just fine with yesterdays stable. I suspect plumbing
problems like Danny says
Wilko
> i've had similar problems, in my case after changing cable/terminator
> the problem was fixed.
>
> danny
>
> In message <[EMAIL PROTECTED]>you write:
> }Hi,
> }
> }I've installed FreeBSD 4.2 -RELEASE and did cvsup last night to -STABLE,
> }then tried /stand/sysinstall and the console hung with message
> }"Probing devices" , in dmesg there was following information:
> }
> }Feb 10 01:27:50 arne /kernel: Untagged Q(6): 13
> }Feb 10 01:27:50 arne /kernel: (sa0:ahc0:0:6:0): Queuing a BDR SCB
> }Feb 10 01:27:50 arne /kernel: (sa0:ahc0:0:6:0): Bus Device Reset Message
> }Sent
> }Feb 10 01:27:50 arne /kernel: (sa0:ahc0:0:6:0): no longer in timeout,
> }status = 34b
> }Feb 10 01:27:50 arne /kernel: ahc0: Bus Device Reset on A:6. 1 SCBs
> aborted
> }Feb 10 03:27:47 arne /kernel: (sa0:ahc0:0:6:0): SCB 0xd - timed out
> }while idle, SEQADDR == 0x4
> }Feb 10 03:27:47 arne /kernel: STACK == 0x1, 0x106, 0x15e, 0x174
> }Feb 10 03:27:47 arne /kernel: SXFRCTL0 == 0x80
> }Feb 10 03:27:47 arne /kernel: SCB count = 230
> }Feb 10 03:27:48 arne /kernel: QINFIFO entries:
> }Feb 10 03:27:48 arne /kernel: Waiting Queue entries:
> }Feb 10 03:27:49 arne /kernel: Disconnected Queue entries: 23:13
> }Feb 10 03:27:49 arne /kernel: QOUTFIFO entries:
> }Feb 10 03:27:49 arne /kernel: Sequencer Free SCB List: 21 5 31 2 14 15
> }30 28 4 18 11 17 27 22 13 12 26 9 8 25 20 1 16 0 3 24 7 10 6 29 19
> }Feb 10 03:27:50 arne /kernel: Pending list: 13
> }Feb 10 03:27:50 arne /kernel: Kernel Free SCB list: 77 39 61 128 125 55
> }95 30 27 23 84 123 67 92 88 103 129 19 58 75 108 85 34 100 28 56 115 50
> }
> }every 2 hours this messages repeated
> }
> }I have Adaptec 29160 ULTRA160 SCSI, IBM SCSI harddisks and HP-DAT
> }Streamer.
> }
> }--
> }Kirill Ponomarew
> }
> }
> }To Unsubscribe: send mail to [EMAIL PROTECTED]
> }with "unsubscribe freebsd-stable" in the body of the message
> }
>
>
>
>
>
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-stable" in the body of the message
---end of quoted text---
--
| / o / / _ Arnhem, The Netherlands email: [EMAIL PROTECTED]
|/|/ / / /( (_) Bulte http://www.freebsd.org http://www.nlfug.nl
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-stable" in the body of the message
