Michael DeMutis schrieb: > > Hi there. > > I'm running the 3.X stable tree. > > I added another hard drive, and went to /stand/sysinstall to install the > drive. > > That all worked fine, I used DiskLabel to set my mount point to /backup > > It all works fine, until I reboot. When I reboot the drive is not mounted, > and I have to use DiskLabel again in order to get the drive to show up. > > I don't lose any data in the process, it's just an inconvienience. > > Another thing to note is that the drive is not listing in /etc/fstab > > Here is my /etc/fstab# Device Mountpoint FStype > Options Dump Pass# > /dev/da0s1b none swap sw 0 0 > /dev/da0s1a / ufs rw 1 1 > /dev/da0s1f /usr ufs rw 2 2 > /dev/da0s1e /var ufs rw 2 2 > proc /proc procfs rw 0 0 Sysinstall cannot add the entry for your new drive automtically. Assuming you added a second SCSI disk with just one big partition, inserting this line into fstab will help: /dev/da1s0e /new/mount/point ufs rw 2 2 HTH -Christoph Sold To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-stable" in the body of the message