Hongbo Li([EMAIL PROTECTED])@2002.04.27 02:05:31 +0000: > Today I updated src and compiled the kernel using the > old kernel config file. After rebooting the box, I > found the cdrom can't be mounted. The message is: > > cd9660: /dev/acd0c: Device not configured > > what's wrong? > I am having the same problem.
Here's some relevant system information from dmesg: FreeBSD 4.5-STABLE #6: Thu Apr 25 06:46:15 EDT 2002 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SMN Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (869.83-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 268419072 (262128K bytes) avail memory = 256761856 (250744K bytes) Preloaded elf kernel "kernel" at 0xc0456000. Preloaded elf module "agp.ko" at 0xc045609c. VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc03bf8c2 (1000022) VESA: NVidia netsmb_dev: loaded Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 8 entries at 0xc00f0e60 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe4000000-0xe7ffffff at device 0.0 on pci0 pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 11 isab0: <VIA 82C596B PCI-ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C596 ATA66 controller> port 0xd800-0xd80f at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 4.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ugen0: SanDisk ImageMate USB SmartMedia, rev 1.10/1.01, addr 2 ums0: Microsoft Microsoft IntelliMouse \M-. with IntelliEye, rev 1.10/1.07, addr 3, iclass 3/1 ums0: 3 buttons and Z dir. pci0: <unknown card> (vendor=0x1106, dev=0x3050) at 4.3 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd000-0xd01f mem 0xd3800000-0xd38fffff,0xd7000000-0xd7000fff irq 5 at device 10.0 on pci0 fxp0: Ethernet address 00:50:8b:63:ea:40 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bktr0: <BrookTree 878> mem 0xd6000000-0xd6000fff irq 10 at device 11.0 on pci0 bktr0: Hauppauge Model 44001 B110 bktr0: Hauppauge WinCast/TV, Philips NTSC tuner. pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 11.1 irq 10 pcm0: <AudioPCI ES1373-B> port 0xb800-0xb83f irq 5 at device 14.0 on pci0 pcib1: <Host to PCI bridge> on motherboard pci2: <PCI bus> on pcib1 orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xd0000-0xd3fff,0xd4000-0xd47ff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 DUMMYNET initialized (011031) IPv6 packet filtering initialized, logging limited to 20 packets/entry IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, logging limited t o 100 packets/entry by default IPsec: Initialized Security Association Processing. ad0: 38166MB <WDC WD400BB-00AUA1> [77545/16/63] at ata0-master UDMA66 ad1: 14664MB <IBM-DJNA-351520> [29795/16/63] at ata0-slave UDMA66 acd0: CDROM <ATAPI 52X CDROM> at ata1-master UDMA33 acd1: CD-RW <8X4X32> at ata1-slave WDMA2 Mounting root from ufs:/dev/ad0s1a As you can see, acd0 and acd1 are recognized properly by the system. I even remade the devices with /dev/MAKEDEV to no avail: crw-r----- 2 root operator 117, 0 Apr 26 22:45 /dev/acd0a crw-r----- 2 root operator 117, 2 Apr 26 22:45 /dev/acd0c crw-r----- 2 root operator 117, 8 Apr 26 22:45 /dev/acd1a crw-r----- 2 root operator 117, 10 Apr 26 22:45 /dev/acd1c Got any other clues? Something broke in -STABLE recently. I just haven't had the need to mount a cd or burn a cdr until last night when I noticed. - Scott -- Scott Nolde GPG Key 0xD869AB48 To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-stable" in the body of the message