----- Original Message ----- From: "Randall Hopper" <[EMAIL PROTECTED]> To: "Marc G. Fournier" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Sunday, April 28, 2002 9:17 AM Subject: Re: ASUS A7M266-D: enabling 'on board sound'
> Marc G. Fournier: > | Just recently picked up an ASUS A7M266-D Motherboard with Dual: > |"(AMD Athlon(TM) MP Processor (1200.05-MHz 686-class CPU)" ... the system > |purrs like the proverbial kitten ... but the one thing that is eluding me > |so far is getting the onboard sound to work ... > ... > |pcm0: <CMedia CMI8738> at device 4.0 on pci2 > |pcm0: cmi_attach: Cannot allocate bus resource > |device_probe_and_attach: pcm0 attach returned 6 > ... > |___device pcm0 at isa? irq 5 drq 1 flags 0x0 > > I have the original non-dual version (ASUS A7M266) with the same sound > chip: > > > dmesg | grep pcm0 > pcm0: <CMedia CMI8738> port 0xa400-0xa4ff irq 10 at device 5.0 on pci0 > > Here's what I have on my 4.3-STABLE (circa 06/01) config: > > device pcm0 > device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15 > > The flags may be the kicker for you. That sets the 2nd (16-bit) DMA > channel IIRC. > If you have the time I would be very interested in having more information about your configuration as I am contemplating building a similar SMP system. How much memory do you have installed and what use do you have for the system? Any information much appreciated. David To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-stable" in the body of the message
