I have a system with buildworld/installworld last done on about 1 June. It's
a pretty plain-jayne HP P4 with an on-board fxp0 interface.
Did a cvsup, buildworld and buildkernel and installkernel on RELENG_4 from
about 1900 UTC on Satuday 10th. Rebooted before doing installworld (just to
make sure). Bloody glad I did, because fxp0 is acting very very strange.
If I boot multiuser, then pings from the fxp0 to other hosts work, but pings
(and all other network access) from other hosts back to the FreeBSD box with
fxp0 work only intermittently if at all. If I run tcpdump in promiscuous mode,
then pings (and everything else) from all other hosts work as normal. Kill
tcpdump, and it all stops again. Run tcpdump in non-promiscuous mode, and it
doesn't work either - it sees incoming ICMP ECHO REQ but no (or only very few)
outgoing ICMP ECHO REPLY.
It's not a module out of date thing (no modules loaded). It's not an IPFW
thing (no hits on the deny rules).
We've tried from various remote boxes, including Suns, Ciscos and other
FreeBSD boxes.
If I revert src/dev/fxp to 2002-08-01 (while the rest of the kernel is still
the 2002-08-10 version and userland still on the 06-01 version) and recompile
and install /kernel, then everything works fine.
If I update src/dev/fxp back to RELENG_4 (there have been no commits since
approx 08-08) and reinstall the kernel, it fails again. (This is with the
rest of kernel source from approx 08-10 and userland from 06-01.)
This _really_ looks like something very strange with the latest fxp commit.
Dmesg from a verbose boot (with the failing fxp driver) and config file
attached.
I'm happy to try random bits of debugging on this box if that's a help to
anyone.
#
# $Id: GROLLO,v 1.3 2002/07/23 06:06:29 aaw Exp $
# $Source: /usr/src/sys/i386/conf/RCS/GROLLO,v $
#
machine i386
cpu I686_CPU
ident GROLLO
maxusers 0
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options UFS_DIRHASH #Improve performance on big directories
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV
device isa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
device ahc # AHA2940 and onboard AIC7xxx devices
# SCSI peripherals
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? disable flags 0x20 # Advanced Power Management
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device ppi # Parallel port interface device
# Ethernet Cards
device miibus # MII bus support
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device xl # 3Com 3c90x
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device gif # IPv6 and IPv4 tunneling
pseudo-device vn
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device ukbd # Keyboard
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
# Firewall / Security Stuff
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_VERBOSE_LIMIT=1000
options IPDIVERT
options IPSEC
options IPSEC_ESP
# sound - woohoo, an onboard that works !!
device pcm
# stallion serial cards
device stl
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-STABLE #9: Mon Aug 12 16:40:09 EST 2002
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GROLLO
Calibrating clock(s) ... TSC clock: 1594119832 Hz, i8254 clock: 1193204 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium 4 (1594.10-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>
real memory = 536805376 (524224K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00415000 - 0x1ffe7fff, 532492288 bytes (130003 pages)
avail memory = 518299648 (506152K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fda80
bios32: Entry = 0xfda90 (c00fda90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xdab1
pnpbios: Found PnP BIOS data at 0xc00f6ad0
pnpbios: Entry = f0000:5a47 Rev = 1.0
Other BIOS signatures found:
ACPI: 000f9e30
Preloaded elf kernel "kernel" at 0xc03ee000.
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a308086)
Using $PIR table, 6 entries at 0xc00f7380
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82845 Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x1a30, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e0000000, size 26
found-> vendor=0x8086, dev=0x1a31, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x244e, revid=0x12
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=2 secondarybus=2
found-> vendor=0x8086, dev=0x2440, revid=0x12
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x244b, revid=0x12
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000fc00, size 4
found-> vendor=0x8086, dev=0x2442, revid=0x12
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=11
map[20]: type 1, range 32, base 0000d000, size 5
found-> vendor=0x8086, dev=0x2443, revid=0x12
class=0c-05-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=0
map[20]: type 1, range 32, base 00000c00, size 4
found-> vendor=0x8086, dev=0x2444, revid=0x12
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=c, irq=5
map[20]: type 1, range 32, base 0000d400, size 5
found-> vendor=0x8086, dev=0x2445, revid=0x12
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=9
map[10]: type 1, range 32, base 0000dc00, size 8
map[14]: type 1, range 32, base 0000d800, size 6
pci0: <PCI bus> on pcib0
pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0
found-> vendor=0x1002, dev=0x5446, revid=0x00
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base d8000000, size 26
map[14]: type 1, range 32, base 00007800, size 8
map[18]: type 1, range 32, base dfdfc000, size 14
pci1: <PCI bus> on pcib1
pci1: <ATI model 5446 graphics accelerator> (vendor=0x1002, dev=0x5446) at 0.0 irq 11
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
found-> vendor=0x8086, dev=0x2449, revid=0x03
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base dfefe000, size 12
map[14]: type 1, range 32, base 0000a800, size 6
found-> vendor=0x124d, dev=0x0003, revid=0x01
class=07-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[14]: type 1, range 32, base 0000a400, size 7
map[18]: type 1, range 32, base 0000a000, size 7
found-> vendor=0x9004, dev=0x5078, revid=0x03
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 0000ac00, size 8
map[14]: type 1, range 32, base dfeff000, size 12
found-> vendor=0x10b7, dev=0x9200, revid=0x78
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base 00009c00, size 7
map[14]: type 1, range 32, base dfefdf80, size 7
pci2: <PCI bus> on pcib2
fxp0: <Intel Pro/100 Ethernet> port 0xa800-0xa83f mem 0xdfefe000-0xdfefefff irq 10 at
device 8.0 on pci2
fxp0: using memory space register mapping
fxp0: Ethernet address 00:04:23:06:fd:82
fxp0: PCI IDs: 8086 2449 8086 3013 0003
fxp0: Dynamic Standby mode is disabled
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
stl0: <EasyIO-PCI> port 0xa000-0xa07f,0xa400-0xa47f irq 10 at device 9.0 on pci2
using shared irq10.
stl0: EasyIO-PCI (driver version 2.0.0) unit=0 nrpanels=1 nrports=8
stl0: driver is using old-style compatibility shims
ahc0: <Adaptec 2902/04/10/15/20/30C SCSI adapter> port 0xac00-0xacff mem
0xdfeff000-0xdfefffff irq 10 at device 10.0 on pci2
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable not present
ahc0: external cable is present
ahc0: BIOS eeprom not present
ahc0: Low byte termination Enabled
ahc0: Downloading Sequencer Program... 447 instructions downloaded
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x9c00-0x9c7f mem 0xdfefdf80-0xdfefdfff
irq 9 at device 11.0 on pci2
xl0: Ethernet address: 00:01:03:45:1d:b1
xl0: media options word: a
xl0: found MII/AUTO
miibus1: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0: OUI 0x00105a, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: xl0 attached
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xfc00-0xfc0f at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfc00
ata0: mask=03 ostat0=50 ostat2=50
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=50
ata0-master: ATA 01 a5
ata0-slave: ATA 01 a5
ata0: devices=03
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfc08
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xd000-0xd01f irq 11 at
device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 0
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xd400-0xd41f irq 5 at
device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcm0: <Intel 82801BA (ICH2)> port 0xd800-0xd83f,0xdc00-0xdcff irq 9 at device 31.5 on
pci0
using shared irq9.
pcm0: ac97 codec id 0x41445360 (Analog Devices AD1885)
pcm0: ac97 codec features headphone, 6 bit master volume, Analog Devices Phat Stereo
pcm0: ac97 primary codec extended features variable rate PCM
pcm0: sndbuf_setmap 34000, 4000; 0xd5d5c000 -> 34000
pcm0: sndbuf_setmap 38000, 4000; 0xd5d60000 -> 38000
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8800-0xc9fff,0xca000-0xca7ff,0xe0000-0xe0fff,0xe8000-0xebfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:01aefe3f 0..430=431 cylinders, 0..254=255 heads, 1..63=63 sectors
1:01aefe3f 0..430=431 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
IP packet filtering initialized, divert enabled, rule-based forwarding enabled,
default to deny, logging limited to 1000 packets/entry by default
bpf: lo0 attached
IPsec: Initialized Security Association Processing.
ad0: success setting UDMA5 on Intel chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <Maxtor 2B020H1/WAH21PB0> ATA-6 disk at ata0-master
ad0: 19458MB (39851760 sectors), 39535 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ad1: success setting UDMA5 on Intel chip
Creating DISK ad1
ar: FreeBSD check1 failed
ad1: <ST320011A/3.10> ATA-5 disk at ata0-slave
ad1: 19458MB (39851760 sectors), 39535 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA100
ad1: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-master: piomode=3 dmamode=1 udmamode=-1 dmaflag=1
ata1-master: success setting PIO3 on generic chip
acd0: <Hewlett-Packard CD-Writer Plus 8100/1.0g> CD-RW drive at ata1 as master
acd0: read 4134KB/s (34515KB/s) write 689KB/s (689KB/s), 1024KB buffer, PIO3
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes: CD-R, CD-RW, test write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
pcm0: measured ac97 link rate at 48003 Hz, will use 48000 Hz
(ahc0:A:5:0): Sending SDTR period 19, offset f
(ahc0:A:5:0): Received SDTR period 32, offset b
Filtered to period 32, offset b
ahc0: target 5 synchronous at 5.0MHz, offset = 0xb
(ahc0:A:5:0): Sending SDTR period 32, offset b
(ahc0:A:5:0): Received SDTR period 32, offset b
Filtered to period 32, offset b
sa0 at ahc0 bus 0 target 5 lun 0
sa0: <EXABYTE EXB-8505 0046> Removable Sequential Access SCSI-2 device
sa0: Serial Number 15008519
sa0: 5.000MB/s transfers (5.000MHz, offset 11)
pass0 at ahc0 bus 0 target 5 lun 0
pass0: <EXABYTE EXB-8505 0046> Removable Sequential Access SCSI-2 device
pass0: Serial Number 15008519
pass0: 5.000MB/s transfers (5.000MHz, offset 11)
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 39841199, size 39841137 : OK
start_init: trying /sbin/init
ad1s1: type 0xa5, start 63, end = 39851279, size 39851217 : OK
ad1s1: type 0xa5, start 63, end = 39851279, size 39851217 : OK
ad1s1: type 0xa5, start 63, end = 39851279, size 39851217 : OK
ad1s1: type 0xa5, start 63, end = 39851279, size 39851217 : OK
ad1s1: type 0xa5, start 63, end = 39851279, size 39851217 : OK
fxp0: promiscuous mode enabled
fxp0: promiscuous mode disabled
