>From that error, it would appear that the NIC requires MIIBUS code. Did you compile your kernel with "device miibus" in the configuration file?
-- Paul A. Howes -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Alexandr Kovalenko Sent: Friday, January 24, 2003 1:37 PM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Tamarack Gigabit Ethernet driver needed (v_id=0x13f0, d_id=0x1021) [Excuse me for such huge crosspost, I just don't know which list is more appropriate for this question] I'm running FreeBSD 4.7-RELEASE-p3 I need driver for ${Subject} ethernet controller. I have found one: http://www.icplus.com.tw/Data/driver/TC902X_FreeBSD.zip (you have to do little trick to get the actual driver: download .zip file, extract it, rename Readme.txt to rio.tgz, then extract it. Only then you will get actual driver source). It does not work, it says: rio0: <Tamarack TC902x Based 10/100/1000 Ethernet Adapter> port 0x3000-0x30ff mem 0xf5021000-0xf50211ff irq 11 at device 11.0 on pci2 rio0: Ethernet address: 00:50:fc:48:9b:da rio0: MII without any phy! device_probe_and_attach: rio0 attach returned 6 Could it be fixed and if yes, then how? Thank you! -- NEVE-RIPE, will build world for food Ukrainian FreeBSD User Group http://uafug.org.ua/ To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-stable" in the body of the message To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-stable" in the body of the message