Do you have Plug and Play enabled in the BIOS ? If so turn it off and try a PCI config reset if that is available in your BIOS. Also, try and get the fxp0 card and the SCSI controller on a different IRQ. I have found they dont always play well together. If they are in a slot that has a shared IRQ, separate them for sure.
---Mike
At 05:16 PM 10/03/2003 -0800, Mike Hoskins wrote:
I had -stable crash this AM on a Dell Poweredge 1550...
FreeBSD fubar.adept.org 4.7-STABLE FreeBSD 4.7-STABLE #6: Thu Feb 13 19:14:26 PST 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/FUBAR i386
Now I'm trying to determine exactly what happened. The only thing I have to go on are the following entries in messages around the time it happened:
Mar 10 04:10:22 fubar /kernel: fxp0: SCB timeout: 0x80 0x0 0x50 0x0 Mar 10 04:10:23 fubar /kernel: fxp0: SCB timeout: 0x80 0x0 0x50 0x0 Mar 10 04:10:24 fubar /kernel: fxp0: SCB timeout: 0x10 0x0 0x50 0x0 Mar 10 04:10:41 fubar /kernel: fxp0: SCB timeout: 0x70 0x0 0x50 0x0 <lots of these> Mar 10 04:12:13 fubar /kernel: fxp0: device timeout Mar 10 04:12:13 fubar /kernel: fxp0: DMA timeout <lots of these>
I haven't seen this on my machines before, but have seen it mentioned here and in the archives. I'm cvsuping now; Anything else that may be to blame? If you're curious, the full dmesg.boot, pciconf -lv and all related messages are online,
http://www.adept.org/pub/fubar
Should the cvsup make things better, or worse? :)
-mrh
To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-stable" in the body of the message
To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-stable" in the body of the message
