Thus spake Holger Kipp ([EMAIL PROTECTED]) [2003-03-17 10:55] :
> Hi,
>
> I just downloaded 4.8RC2 and recompiled with SMP and APIC enabled.
> Instead of 4 CPUs (2 XEON with HT) only two are recognized and the
> system hangs after initialising the second CPU:
> Last message (about ufs-mounting /dev/da0s1a) needs some time to
> appear. Num and Scroll-Buttons still work. Nothing else happens
> afterwards.
>
> Works flawless with 4.7-STABLE from 17.02.2003 on DL360 and DL380.
> I also have no problems with 4.8-RC from 07.03.2003 (on DL360).
>
> 4.8 RC2 in Single-Mode (GENERIC) makes no problems either.
>
> I looked inside /usr/src/UPDATING but couldn't find anything about
> additional options needed (iirc there were some mails about additional
> options for HT to come).
>
> Anyway, SMP-System shouldn't hang during boot.
> Testing is restricted (production systems). Sorry.
>
> If there is anything else I can do to test this, please let me know,
> and I'll try to fit this in somehow ;-)
I have RC2 running on 2 HP Proliant DL360 with SMP and APIC enabled.
One is merrily chewing up the jdk14 build as we speak. Standard questions
apply. Do you have the current BIOS installed, etc. Also, a dmesg might
be nice to help figure out what's going on.
If I might be so bold ... why are you running an RC on production
systems? :)
--
-------------------------------------------------------------------------
Samuel Kesterson
[EMAIL PROTECTED]
DISCLAIMER: All views expressed are mine and mine alone and likely are
not the views of my employer ... blah, blah, blah ...
-------------------------------------------------------------------------
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-stable" in the body of the message
