I would risk the upgrade to 5.3. What can you lose? It is crashing
frequently already... 5.2.1 was not a stable release officially. Just make
sure that you follow the migration guide step by step
(http://www.freebsd.org/releases/5.3R/migration-guide.html). Do not skip
mergemaster. And you must recompile all installed binaries after the
upgrade, including all installed ports.
Zoltan
Hi,
I've been asked to help this former customer.
This box is running 5.2.1 with as most "exotic" application jave/tomcat.
And
it crashes too often. The first essential question for the customer is: Is
this hardware??? So I did the 'make -j 8 buildworld' test, which it
survived
with flying colors.
What do I find in the logs:
Nov 12 11:22:01 ktc syslogd: kernel boot file is /boot/kernel/kernel
Nov 12 11:22:01 ktc kernel: panic: vm_fault: fault on nofault entry, addr:
ee8fd000
Nov 12 11:22:01 ktc kernel:
Nov 12 11:22:01 ktc kernel: syncing disks, buffers remaining... panic:
bremfree: removing a buffer not on a queue
Nov 12 11:22:01 ktc kernel: Uptime: 2d11h12m6s
Nov 12 11:22:01 ktc kernel: Shutting down ACPI
Nov 12 11:22:01 ktc kernel: Automatic reboot in 15 seconds - press a key
on
the console to abort
......
Nov 12 11:22:02 ktc kernel: WARNING: / was not properly dismounted
Nov 12 11:53:54 ktc syslogd: kernel boot file is /boot/kernel/kernel
Nov 12 11:53:54 ktc kernel: panic: vm_fault: fault on nofault entry, addr:
ee79f000
Nov 12 11:53:54 ktc kernel:
Nov 12 11:53:54 ktc kernel: syncing disks, buffers remaining... panic:
bremfree: removing a buffer not on a queue
Nov 12 11:53:54 ktc kernel: Uptime: 31m36s
Nov 12 11:53:54 ktc kernel: Shutting down ACPI
Now the panic in the syncing part, I can imagine to just be there since
syncing disk after a panic has not really worked all that well in 5.x
Customer has disabled all warnings/witness/.....
And I can not make much of the comments on sys/vm/vm_fault.c:278, which is
where the fault on nofault occurs...
My feeling says: upgrade to 5.3, but this being a production server
running
soem applications I know very little off holds me back.
So is this for sure a hardware problem, or just leftovers from 5.2.1????
--WjW
-------- Original Message --------
Date: Tue, 16 Nov 2004 20:57:26 +0100 (CET)
From: Jan Willem <wjw at ktc.netmaniacs.nl>
To: wjw at withagen.nl
3.78.225.127:138 193.78.225.255:138 in via fxp0
TPTE at 0xbfc203e4 IS ZERO @ VA 080f9000
panic: bad pte
syncing disks, buffers remaining... panic: bremfree: removing a buffer not
on
a queue
Uptime: 6h59m22s
Shutting down ACPI
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p9 #4: Tue Aug 24 01:16:22 CEST 2004
joao at ktc.netmaniacs.nl:/usr/src/sys/i386/compile/KTC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09ee000.
Preloaded elf module "/boot/kernel/aout.ko" at 0xc09ee26c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09ee318.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3192.22-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 2129850368 (2031 MB)
avail memory = 2063503360 (1967 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INTEL D865GLC > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00f3d20
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTA is routed to irq 11
pcib0: slot 29 INTA is routed to irq 11
pcib0: slot 29 INTB is routed to irq 5
pcib0: slot 29 INTC is routed to irq 10
pcib0: slot 29 INTA is routed to irq 11
pcib0: slot 29 INTD is routed to irq 9
pcib0: slot 31 INTA is routed to irq 10
pcib0: slot 31 INTB is routed to irq 3
agp0: <Intel 82865G (865G GMCH) SVGA controller> port 0xec00-0xec07 mem
0xffa80000-0xffafffff,0xf0000000-0xf7ffffff irq 11 at device 2.0 on pci0
agp0: detected 16252k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xc800-0xc81f irq
11
at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xcc00-0xcc1f irq
5 at
device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xd000-0xd01f irq
10
at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xd400-0xd41f irq
11
at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 10
pcib1: slot 1 INTA is routed to irq 10
pcib1: slot 8 INTA is routed to irq 11
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
asr0: <Adaptec Caching SCSI RAID> mem 0xe4000000-0xe5ffffff irq 10 at
device
0.1 on pci1
asr0: major=154
asr0: ADAPTEC 2100S FW Rev. 370F, 1 channel, 256 CCBs, Protocol I2O
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xbc00-0xbc7f mem
0xff8efc00-0xff8efc7f irq 10 at device 1.0 on pci1
xl0: Ethernet address: 00:04:76:f6:e1:1c
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xb800-0xb83f mem
0xff8ee000-0xff8eefff irq 11 at device 8.0 on pci1
fxp0: Ethernet address 00:0c:f1:91:52:7b
miibus1: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
atapci1: <Intel ICH5 SATA150 controller> port
0xd800-0xd80f,0xdc00-0xdc03,0xe000-0xe007,0xe400-0xe403,0xe800-0xe807 irq
10
at device 31.2 on pci0
atapci1: [MPSAFE]
ata2: at 0xe800 on atapci1
ata2: [MPSAFE]
ata3: at 0xe000 on atapci1
ata3: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
orm0: <Option ROMs> at iomem 0xca000-0xcffff,0xc0000-0xc9fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 3192222428 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default
to
deny, logging unlimited
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acd0: CDROM <LTN526S> at ata1-master PIO4
GEOM: create disk da0 dp=0xc869b050
da0 at asr0 bus 0 target 0 lun 0
da0: <ADAPTEC 1POINT-ADVISE 370F> Fixed Direct Access SCSI-2 device
da0: Tagged Queueing Enabled
da0: 70007MB (143374336 512 byte sectors: 255H 63S/T 8924C)
Mounting root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
WARNING: /usr was not properly dismounted
/usr: superblock summary recomputed
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
