On 3 Feb 2005, at 21:52, Søren Schmidt wrote:
o ATA RAID can only read metadata not write them. This means that
arrays can be picked up from the BIOS, but they cannot be created
from FreeBSD. This is being worked on for the final release as is
RAID5 support for Promise/Highpoing/SiI controllers.
Will RAID mirrors built using atacontrol on standard ata controllers still work? Specifically in my case on 5.3-stable:
atapci0: <Intel ICH5 UDMA100 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
ad0: 117246MB <Maxtor 6Y120L0/YAR41BW0> [238216/16/63] at ata0-master UDMA100
ad2: 117246MB <Maxtor 6Y120L0/YAR41BW0> [238216/16/63] at ata1-master UDMA100
and:
[aurora:~]138: sudo atacontrol status 0 ar0: ATA RAID1 subdisks: ad0 ad2 status: READY
Thanks, Ben
_______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
