Hi, I have a CDRW burner that use to work (with 5.2.1 the last time.)
But since one of my last RELENG_5_2 update I encounter errors when burning CDRW (I don't have CDR to test, but I rember having strange behaviour with CDR also.) Switching to RELENG-5 (re-install 5.3 and cvsup after) a week ago doesn't change anything. burncd dies with message : [EMAIL PROTECTED] 17:05 FreeBSD-5.3]# burncd -e -v -f /dev/acd0 data 5.3-RELEASE-i386-disc1.iso fixate adding type 0x08 file 5.3-RELEASE-i386-disc1.iso size 660384 KB 330192 blocks burncd: ioctl(CDRIOCNEXTWRITEABLEADDR): Input/output error ($status : 74) And I have those messages in my log : kernel: acd0: FAILURE - READ_TRACK_INFO ILLEGAL REQUEST asc=0x24 ascq=0x00 error=4<ABORTED> kernel: acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> last message repeated 3 times I have tried with cdrecord and atapicam, but again it fails with message : cdrecord: No write mode specified. cdrecord: Asuming -tao mode. cdrecord: Future versions of cdrecord may have different drive dependent defaults. cdrecord: Continuing in 5 seconds... Cdrecord-Clone 2.01 (i386-unknown-freebsd5.3) Copyright (C) 1995-2004 Jörg Schilling scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Using libscg version 'schily-0.8'. Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'RW/DVD GCC-4481B' Revision : 'C103' Device seems to be: Generic mmc2 DVD-ROM. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R cdrecord: Drive needs to reload the media to return to proper status. cdrecord: Cannot get next writable address for 'invisible' track. cdrecord: This means that we are checking recorded media. cdrecord: This media cannot be written in streaming mode anymore. cdrecord: If you like to write to 'preformatted' RW media, try to blank the media first. Starting to write CD/DVD at speed 10 in real TAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Turning BURN-Free off cdrecord: Input/output error. read track info: scsi sendcmd: retryable error CDB: 52 01 00 00 00 FF 00 00 1C 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.003s timeout 240s cdrecord: Cannot get next writable address for 'invisible' track. cdrecord: This means that we are checking recorded media. cdrecord: This media cannot be written in streaming mode anymore. cdrecord: If you like to write to 'preformatted' RW media, try to blank the media first. cdrecord: Cannot get next writable address. Of course, I have erased and blanked the CDRW before (with burncd and without any error ... ) I have no READ_BIG error in my log with cdrecord. I tried to switch drive in PIO4 or UDMA33, the result is the same ... I saw PR 75875, but it is still open and I have no mounting/reading problem. My kernel is a Generic without some adaptors, with atapicam and some color for the console, but I've got the same problem with a generic kernel. Here my dmesg : Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-STABLE #0: Fri Feb 4 18:45:33 CET 2005 root@:/usr/home/obj/usr/src/sys/KER_pc5-179 MPTable: <DELL WS 360 > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3192.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 1073168384 (1023 MB) avail memory = 1036431360 (988 MB) ioapic0: Changing APIC ID to 1 ioapic0: Assuming intbase of 0 ioapic0 <Version 2.0> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82875P host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0 pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 nvidia0: <Quadro FX 500/600 PCI> mem 0xf0000000-0xf7ffffff,0xfd000000-0xfdffffff irq 16 at device 0.0 on pci1 nvidia0: [GIANT-LOCKED] uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xff80-0xff9f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xff60-0xff7f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3: Cypress Semiconductor Slim Hub, class 9/0, rev 2.00/0.08, addr 2 uhub3: 4 ports with 4 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xff20-0xff3f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib2: <MPTable PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xdf40-0xdf7f mem 0xfcfe0000-0xfcffffff irq 18 at device 12.0 on pci2 em0: Ethernet address: 00:0c:f1:cc:4e:da em0: Speed:N/A Duplex:N/A isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 18 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 atapci1: <Intel ICH5 SATA150 controller> port 0xfea0-0xfeaf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 irq 18 at device 31.2 on pci0 ata2: channel #0 on atapci1 ata3: channel #1 on atapci1 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH5 (82801EB)> port 0xedc0-0xedff,0xee00-0xeeff mem 0xfebff900-0xfebff9ff,0xfebffa00-0xfebffbff irq 17 at device 31.5 on pci0 pcm0: [GIANT-LOCKED] pcm0: <Analog Devices AD1980 AC97 Codec> cpu0 on motherboard orm0: <ISA Option ROMs> at iomem 0xd1000-0xd3fff,0xcf800-0xd0fff,0xc0000-0xcf7ff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model MouseMan+, device ID 0 fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0400> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0303> can't assign resources (port) Timecounter "TSC" frequency 3192017656 Hz quality 800 Timecounters tick every 1.000 msec em0: Link is up 100 Mbps Full Duplex ad0: 76293MB <Maxtor 6Y080L0/YAR41BW0> [155009/16/63] at ata0-master UDMA100 acd0: CDRW <HL-DT-ST RW/DVD GCC-4481B/C103> at ata1-master UDMA33 cd0 at ata1 bus 0 target 0 lun 0 cd0: <HL-DT-ST RW/DVD GCC-4481B C103> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from ufs:/dev/ad0s1a em0: Link is up 100 Mbps Full Duplex acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> cd9660: RockRidge Extension acd0: FAILURE - READ_TRACK_INFO ILLEGAL REQUEST asc=0x24 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_TRACK_INFO ILLEGAL REQUEST asc=0x24 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_TRACK_INFO ILLEGAL REQUEST asc=0x24 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_TRACK_INFO ILLEGAL REQUEST asc=0x24 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_TRACK_INFO ILLEGAL REQUEST asc=0x24 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> acd0: FAILURE - READ_TRACK_INFO ILLEGAL REQUEST asc=0x24 ascq=0x00 error=4<ABORTED> -- Burelle Marwan, Equipe Bases de Donnees - LRI http://www.cduce.org ([EMAIL PROTECTED] | [EMAIL PROTECTED])
pgpW7qrQiOYDk.pgp
Description: PGP signature