hello please help me. ok my computer has an sata hard drive on it. but the problem is i cant find the driver for it to install before installing XP my motherboards chipset is
915G my I/O controller is 82801 FB ICH6. now after days of searching i came up across this site where you had said this one seemed to get workign fine patch attatched. i cannot find the patch though. also by patch do you mean floppy files? please can you please help me get my computer to take my Sata Drive as SATA and not udma (ATA/100)??? Please help me
RELENG_5 works with this controller / chipset for me. Perhaps try one of the recent RELENG_5 snapshots at
ftp://ftp.freebsd.org/pub/FreeBSD/snapshots/Feb_2005/5.3-STABLE-SNAP001-i386-miniinst.iso
eg
fxp0: <Intel 82562EZ (ICH6)> port 0xd000-0xd03f mem 0xd0000000-0xd0000fff irq 10 at device 8.0 on pci1
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:01:80:57:29:a9
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 SATA150 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0
# atacontrol cap 0 0 ATA channel 0, Master, device ad0:
Protocol Serial ATA v1.0 device model ST3120026AS serial number 3JT1BSB2 firmware revision 3.18 cylinders 16383 heads 16 sectors/track 63 lba supported 234441648 sectors lba48 supported 234441648 sectors dma supported overlap not supported
Feature Support Enable Value Vendor write cache yes yes read ahead yes yes SATA NCQ no - 0/0x00 SMART yes yes microcode download yes yes security yes no power management yes yes advanced power management no no 65278/0xFEFE automatic acoustic management no no 0/0x00 254/0xFE
---Mike
_______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
