Hi Eugene,
Eugene Mitrofanov wrote:
I've got Subj and FreeBSD-5.4PRE on it. But RAID0 is too slow:
[EMAIL PROTECTED]:eugene# dd if=/dev/zero of=/var/tmp/1 bs=1m count=100
100+0 records in
100+0 records out
104857600 bytes transferred in 31.949508 secs (3281979 bytes/sec)
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x4000-0x40ff mem
0xcffe0000-0xcffeffff,0xcfff0000-0xcfffffff irq 28 at device 1.0 on pci4
da0 at mpt0 bus 0 target 0 lun 0
da0: <LSILOGIC 1030 IM IM 1000> Fixed Direct Access SCSI-2 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing
Enabled
da0: 34678MB (71020544 512 byte sectors: 255H 63S/T 4420C)
I'd say you are seeing the same as I am with the same card in a Dell
1855. There is something wrong with the mpt driver and the disks when
they are setup in a raid0 set. If you split the disks and use them as
individual drives then you will get full performance.
Carl.
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
