On Tue, 12 Apr 2005, Philip Murray wrote: > Hi, > > I'm running RELENG_5 on a Dell PowerEdge 750 and the ichsmb driver > doesn't want to work with it, I get the following on boot: > > ichsmb0: <Intel 6300ESB (ICH) SMBus controller> port 0x8c0-0x8df irq 17 > at device 31.3 on pci0 > device_attach: ichsmb0 attach returned 6 > > It then doesn't load smb or smbus. I had a look in the source and it is > supposed to work with this controller. > > Is this something wrong with the driver? or have I left out some bit of > configuration? > > Attached is the output from boot -v and my kernel configuration. Is > there any other debugging output that would be useful?
According to the boot -v messages the I/O range map is getting attached to the wrong function on that chip: found-> vendor=0x8086, dev=0x25a3, revid=0x02 bus=0, slot=31, func=2 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02a8, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 000008c0, size 5, enabled but it should be on this: ichsmb0: <Intel 6300ESB (ICH) SMBus controller> port 0x8c0-0x8df irq 17 at device 31.3 on pci0 I'll poke at this a bit, but you should check for a BIOS update. -- Doug White | FreeBSD: The Power to Serve [EMAIL PROTECTED] | www.FreeBSD.org _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"