Yeah, sorry- the newer QLogic cards have firmware that has a different protocol that I haven't written the code for yet.
In general, always load the firmware module as well. *EVENTUALLY* we'll be able to unload it and reclaim the member. On 5/2/05, Danny Braniss <[EMAIL PROTECTED]> wrote: > > On Mon, May 02, 2005 at 04:45:10PM +0300, Danny Braniss wrote.. > > > > Yes, the 234X cards have been supported for quite a while. > > > > > > > it seems not all of them: > > > it's a QLA2342/ISP2312 and im getting: > > > isp1: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x2400-0x24ff mem > > > 0xfe8e0000-0xfe8e0fff irq 24 at device 8.0 on pci3 > > > isp1: bad execution throttle of 0- using 16 > > > isp2: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x2000-0x20ff mem > > > 0xfe8f0000-0xfe8f0fff irq 27 at device 8.1 on pci3 > > > isp2: bad execution throttle of 0- using 16 > > > > > > Have you loaded the ispfw.ko firmware module? Matt tests the driver > > against that firmware, not against all the firmware revs Qlogic has > > released over time. > BINGO! > and i thought isp does the firmware update ... > > thanks, > danny > > _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
