On Sun, 2005-Sep-04 04:27:24 +0200, Emanuel Strobl wrote: >standard. Here's what my non-acpi/apic system ([EMAIL PROTECTED]) says: >kern.clockrate: { hz = 1000, tick = 1000, profhz = 1024, stathz = 128 } >And here from my 1GHz Celeron with acpi and apic: >kern.clockrate: { hz = 1000, tick = 1000, profhz = 666, stathz = 133 } > >Can somebody eplain the profhz to me? Especially why it's higher on the >much slower machine...
On your older system, profhz and stathz are driven the RTC interrupts and tick is driven by the 8254. On your newer system all the clocks are derived from the LAPIC timer running at 2000Hz - tick is LAPIC/2, profhz is LAPIC/3 and stathz is LAPIC/15. The actual values of profhz and stathz are unimportant, their primary purpose is to sample the system state at a rate that is difficult for processes to synchronize with. If a process synchronizes with the profiling/statistics clock then the statistics become unreliable (and a process can cheat the scheduler by appearing to use no CPU time). -- Peter Jeremy _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"