On Thu, 10 Nov 2005, Michael Butler wrote: > David Taylor wrote: > > | [snip] > | > | I'm still seeing (lots) of these messages (below) on 6.0-RELEASE. > | Should I just file a PR about it, and is there anything else that > | would be useful to track down what's causing them? > > I get these with an HighPoint HPT372N UDMA133 controller .. what is your's?
It was in my previous mail, perhaps I snipped a little too much... anyway: atapci0: <Promise PDC20579 SATA150 controller> port 0xec00-0xec7f,0xe800-0xe8ff mem 0xcfffb000-0xcfffbfff,0xcffc0000-0xcffdffff irq 17 at device 13.0 on pci0 atapci1: <VIA 6420 SATA150 controller> port 0xc800-0xc807,0xc400-0xc403,0xc000-0 xc007,0xbc00-0xbc03,0xb800-0xb80f,0xb400-0xb4ff irq 20 at device 15.0 on pci0 atapci2: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376, ar0 (mentioned in the error messages) is ad4 and ad6, which are connected to the Promise controller. ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 ata4: <ATA channel 2> on atapci0 ad4: 156334MB <Maxtor 6B160M0 BANC1B70> at ata2-master SATA150 ad6: 156334MB <Maxtor 6B160M0 BANC1B70> at ata3-master SATA150 ar0: 156334MB <Promise Fasttrak RAID1> status: READY ar0: disk0 READY (master) using ad6 at ata3-master ar0: disk1 READY (mirror) using ad4 at ata2-master -- David Taylor _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"