Here is dmes.boot and pciconf output on FreeBSD-6.0-RELEASE.
Boot takes 3-4 minutes after "da0: 140014MB (286749488 512 byte sectors:
255H 63S/T 17849C)" line and continues.
I will try to upgrade again to 6.1-PRERELEASE later today. I did before
and the problem still was there.
dmesg.boot:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
MPTable: <HP PROLIANT >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3200.12-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
AMD Features=0x20000000<LM>
Hyperthreading: 2 logical CPUs
real memory = 1073688576 (1023 MB)
avail memory = 1041793024 (993 MB)
ioapic0: Assuming intbase of 0
ioapic1: Assuming intbase of 24
ioapic2: Assuming intbase of 48
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <HP P50> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 3 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 3 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 3 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 3 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 3 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 3 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 3 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <MPTable PCI-PCI bridge> at device 2.0 on pci0
pci2: <PCI bus> on pcib1
pcib2: <MPTable PCI-PCI bridge> at device 0.0 on pci2
pci3: <PCI bus> on pcib2
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x4000-0x40ff mem
0xfdee0000-0xfdefffff,0xfdec0000-0xfdedffff irq 31 at device 3.0
on pci3
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.2.14.0
mpt0: Unhandled Event Notify Frame. Event 0xa.
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x4400-0x44ff mem
0xfdea0000-0xfdebffff,0xfde80000-0xfde9ffff irq 27 at device 3.1
on pci3
mpt1: [GIANT-LOCKED]
mpt1: MPI Version=1.2.14.0
mpt1: Unhandled Event Notify Frame. Event 0xa.
pcib3: <MPTable PCI-PCI bridge> at device 0.2 on pci2
pci7: <PCI bus> on pcib3
bge0: <Broadcom BCM5703X Gigabit Ethernet, ASIC rev. 0x1100> mem
0xfdff0000-0xfdffffff irq 49 at device 3.0 on pci7
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:14:c2:60:1e:fc
pcib4: <MPTable PCI-PCI bridge> at device 4.0 on pci0
pci11: <PCI bus> on pcib4
pcib5: <MPTable PCI-PCI bridge> at device 5.0 on pci0
pci14: <PCI bus> on pcib5
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x2000-0x201f
irq 9 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x2020-0x203f
irq 9 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x2040-0x205f
irq 9 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x2060-0x207f
irq 9 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfbef0000-0xfbef03ff irq
9 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib6: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib6
pci1: <display, VGA> at device 3.0 (no driver attached)
pci1: <base peripheral> at device 4.0 (no driver attached)
pci1: <base peripheral> at device 4.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77d irq
7 drq 0 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 3200124448 Hz quality 800
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
acd0: CDROM <HL-DT-ST CD-ROM GCR-8486B/2.00> at ata0-master UDMA33
da0 at mpt0 bus 0 target 0 lun 0
da0: <COMPAQ BD1468A4B5 HPB8> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged
Queueing Enabled
da0: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C)
Trying to mount root from ufs:/dev/da0s1a
pciconf -lv:
[EMAIL PROTECTED]:0:0: class=0x060000 card=0x32000e11 chip=0x35908086
rev=0x0c hdr=0x00
vendor = 'Intel Corporation'
device = 'E752x Server Memory Controller Hub'
class = bridge
subclass = HOST-PCI
[EMAIL PROTECTED]:2:0: class=0x060400 card=0x00000050 chip=0x35958086 rev=0x0c
hdr=0x01
vendor = 'Intel Corporation'
device = 'E752x Memory Controller Hub PCI Express Port A0'
class = bridge
subclass = PCI-PCI
[EMAIL PROTECTED]:4:0: class=0x060400 card=0x00000050 chip=0x35978086 rev=0x0c
hdr=0x01
vendor = 'Intel Corporation'
device = 'E752x Memory Controller Hub PCI Express Port B0'
class = bridge
subclass = PCI-PCI
[EMAIL PROTECTED]:5:0: class=0x060400 card=0x00000050 chip=0x35988086 rev=0x0c
hdr=0x01
vendor = 'Intel Corporation'
device = 'E752x Memory Controller Hub PCI Express Port B1'
class = bridge
subclass = PCI-PCI
[EMAIL PROTECTED]:29:0: class=0x0c0300 card=0x32010e11 chip=0x24d28086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1'
class = serial bus
subclass = USB
[EMAIL PROTECTED]:29:1: class=0x0c0300 card=0x32010e11 chip=0x24d48086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2'
class = serial bus
subclass = USB
[EMAIL PROTECTED]:29:2: class=0x0c0300 card=0x32010e11 chip=0x24d78086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3'
class = serial bus
subclass = USB
[EMAIL PROTECTED]:29:3: class=0x0c0300 card=0x32010e11 chip=0x24de8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4'
class = serial bus
subclass = USB
[EMAIL PROTECTED]:29:7: class=0x0c0320 card=0x32010e11 chip=0x24dd8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB 2.0 EHCI Controller'
class = serial bus
subclass = USB
[EMAIL PROTECTED]:30:0: class=0x060400 card=0x00000000 chip=0x244e8086
rev=0xc2 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), 6300ESB
Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
[EMAIL PROTECTED]:31:0: class=0x060100 card=0x00000000 chip=0x24d08086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge'
class = bridge
subclass = PCI-ISA
[EMAIL PROTECTED]:31:1: class=0x01018a card=0x32010e11 chip=0x24db8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) EIDE Controller'
class = mass storage
subclass = ATA
[EMAIL PROTECTED]:0:0: class=0x060400 card=0x00000044 chip=0x03298086 rev=0x09
hdr=0x01
vendor = 'Intel Corporation'
device = '6700PXH PCI Express-to-PCI Express Bridge A'
class = bridge
subclass = PCI-PCI
[EMAIL PROTECTED]:0:2: class=0x060400 card=0x00000044 chip=0x032a8086 rev=0x09
hdr=0x01
vendor = 'Intel Corporation'
device = '6700PXH PCI Express-to-PCI Express Bridge B'
class = bridge
subclass = PCI-PCI
[EMAIL PROTECTED]:3:0: class=0x010000 card=0x00da0e11 chip=0x00301000 rev=0x08
hdr=0x00
vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
device = 'LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller'
class = mass storage
subclass = SCSI
[EMAIL PROTECTED]:3:1: class=0x010000 card=0x00da0e11 chip=0x00301000 rev=0x08
hdr=0x00
vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
device = 'LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller'
class = mass storage
subclass = SCSI
[EMAIL PROTECTED]:3:0: class=0x020000 card=0x00cb0e11 chip=0x16c714e4 rev=0x10
hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM5703A3 NetXtreme Gigabit Ethernet'
class = network
subclass = ethernet
[EMAIL PROTECTED]:3:0: class=0x030000 card=0x001e0e11 chip=0x47521002 rev=0x27
hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'Rage XL PCI'
class = display
subclass = VGA
[EMAIL PROTECTED]:4:0: class=0x088000 card=0xb2060e11 chip=0xb2030e11 rev=0x01
hdr=0x00
vendor = 'Compaq Computer Corp (Now owned by Hewlett-Packard)'
device = 'iLo Integrated Lights Out Processor'
class = base peripheral
[EMAIL PROTECTED]:4:2: class=0x088000 card=0xb2060e11 chip=0xb2040e11 rev=0x01
hdr=0x00
vendor = 'Compaq Computer Corp (Now owned by Hewlett-Packard)'
device = 'iLo Integrated Lights Out Processor'
class = base peripheral
Ganbold
Matthew Jacob wrote:
insufficient info
On 3/30/06, Ganbold <[EMAIL PROTECTED]> wrote:
Hi,
I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4.
The problem is "-" appears on the screen and it never boots unless
somebody hits the
"Enter" key. Sometimes even PS2 keyboard doesn't respond during that
time. Tried with
USB keyboard, same problem.
The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic
(mpt-5.0.5.20.00 bios) LSI1030-IT controller and one Compaq BD1468A4B5
146GB SCSI disk.
It didn't even boot with WITNESS and INVARIANTS options, scrolls very
fast and forever showing some SCSI stuffs.
How to solve this problem? Does anybody have this kind of issues before?
thanks,
Ganbold
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
