Holger, >puc0: <Titan PCI-800H> port 0xa400-0xa41f,0xa000-0xa01f mem >0xdf800000-0xdf800fff,0xdf000000-0xdf000fff irq 10 at device 11.0 on pci0 >puc1: <Titan PCI-800H> port 0x9800-0x981f,0x9400-0x941f mem >0xde800000-0xde800fff,0xde000000-0xde000fff irq 10 at device 11.1 on pci0
The Titan device shows up as two PCI devices with shared interrupt. Shared interrupts are supported by the puc(4) driver, but not in fast interrupt mode. This eats a lot of CPU, causes silo overflows and character loss. This is what the kernel tells you: >sio12: unable to activate interrupt in fast mode - using normal mode If possible try to make these two different irqs, or disable "half of the board". Helge _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
