On Thu, 27 Apr 2006, Dmitriy Kirhlarov wrote: DK> > what should I do to drift serial console from sio0 to sio4 on puc (alas, com1 DK> > is broken on given motherboard, and there is no com2)? Quick googling and DK> > looking through the Handbook does not help much. DK> DK> look like impossible. DK> DK> handbook. DK> 22.6.5.2 Using Serial Port Other Than sio0 for the Console DK> DK> Edit /etc/make.conf and set BOOT_COMCONSOLE_PORT to the address of the DK> port you want to use (0x3F8, 0x2F8, 0x3E8 or 0x2E8). Only sio0 through DK> sio3 (COM1 through COM4) can be used; multiport serial cards will not DK> work. No interrupt setting is needed.
It seems (looking at kernel config lines) that this is true for RELENG_4 times; I hope something improved over time ;-) Sincerely, D.Marck [DM5020, MCK-RIPE, DM3-RIPN] ------------------------------------------------------------------------ *** Dmitry Morozovsky --- D.Marck --- Wild Woozle --- [EMAIL PROTECTED] *** ------------------------------------------------------------------------ _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"