Ok, I had already installed and booted the first patch. I then rebuilt the kernel with the second patch. Trying to reboot from the first patch to the second resulted in a crash/panic on shutdown. I didn't capture the output from this. Once I booted the second patch the machine panics in the boot process, in short: /dev/raid3t/moviesf: clean,o 190615 free (19p11 frags, 23588 oblocks, 0.8% fralogy locked @ /usr/src/sys/geom/raid3/g_raid3.c:773. KDB: enter: panic [thread pid 35 tid 100030 ] Stopped at kdb_enter+0x30: leave
The text copied from the serial console was a little garbled, it did say something like: sx lock, geom topology locked... I did an "alltrace" at that point which I'll send seperately. Thanks, Brad > On Thu, Apr 27, 2006 at 08:55:35AM +0200, Pawel Jakub Dawidek wrote: > +> On Sun, Apr 23, 2006 at 12:04:33PM -0700, Bradley W. Dutton wrote: > +> +> Hi, > +> +> > +> +> I'm experiencing a sort of livelock on a 6.1 prerelease box. It > appears > +> +> all of the IO related activity hangs but the box continues to do > +> +> routing/NAT/etc for internet access from my other boxes. I can > usually > +> +> get the lockup to occur within about 12 hours of booting. > +> > +> Ok, I think I found it. Could you try this patch: > +> > +> http://people.freebsd.org/~pjd/patches/g_raid3.c.4.patch > > markus@ reported the livelock is still there, so please try this patch > instead: > > http://people.freebsd.org/~pjd/patches/g_raid3.c.5.patch _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"