Scot Hetzel wrote:
On 6/20/06, Patrick Bowen <[EMAIL PROTECTED]> wrote:
Pyun YongHyeon wrote:
>On Tue, Jun 20, 2006 at 04:04:52PM -0500, Patrick Bowen wrote:
> > Hello:
> >
> > I have two questions.
> >
> > The first regards support for the Broadcom BCM94318 wireless LAN
> > adapter. When trying to compile the module for if_ndis using
bcmwl5.inf
> > and bcmwl5.sys, I get the following error;
> >
> > In file included from
> > /usr/src/sys/modules/if_ndis/../../dev/if_ndis/if_ndis.c:66:
> > @/sys/bus.h:461:23: device_if.h: No such file or directory
> > @/sys/bus.h:462:20: bus_if.h: No such file or directory
> > In file included from
> > /usr/src/sys/modules/if_ndis/../../dev/if_ndis/if_ndis.c:75:
> > @/dev/pci/pcivar.h:165:20: pci_if.h: No such file or
directory
> >
> > Have these three files been removed from the source tree?
> >
Thanks! That takes care of the wired connection. Now all I have to do is
get the wireless to work.
Regarding the original subject line, the "ndis" was, of course, for the
Broadcom device. I tried a different .inf file after googling some more
(bcmwl5a.inf), and this time I was able to produce an if_ndis.ko file. I
loaded both the ndis.ko and if_ndis.ko modules, but got nothing...zip,
zilch, zero. Nothing in dmesg, nothing in ifconfig...I must still be
doing something wrong...
Did you use ndisgen to build the NDIS bcmwl5_sys.ko kernel module from
the windows driver?
bcmwl5_sys.ko is what you need to load to get your wireless card to
work with the NDIS module.
Scot
Here's an interesting data point. I used ndisgen on Windows drivers from
HP, and it produced module BCMWL5_SYS.ko. (my machine is a Gateway MX6121).
Unfortunately, after loading the module, the device didn't show up in
dmesg or ifconfig. Now I'm wondering if the card isn't ferschimmeled...
Patrick
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
