Hi,
How often is this crash? (daily, weekly, monthy...)
What's the freebsd version you're using?
Can you try your card in an other PCI slot and do you have other PCI devices?
Does this reset and/or crash could be related to high i/o or something else?
We have a similar, but a 4port (9500S-4) controller with 5.5 and in a PCI-X and
works fine.
64bit support in freebsd differs from the PCI 64bit. In a PCI-X slot, the 64bit is the databus
"width", instead of the normal 32bit. You can's enforce it, but it works automatically in PCI-X slots.
(A dmesg and a crash dump, if you can provide it, would be nice for the
developer guys imho.)
Regards,
Andrej
Ville Sulin wrote:
Hi,
I have a smallish problem, got a backup server with ASUS PC-DL motherboard that
doesn't have a 64 bit pci slot
and a 3ware 9500S-8 card. The machine resets the controller every now and then,
but when there's enough disk
io when it tries to do that the machine crashes.
console warnings:
twa0: INFO: (0x04: 0x000c): : unit=0
twa0: ERROR: (0x05: 0x210b): Request timed out!: request = 0xc64fb1f0
twa0: INFO: (0x16: 0x1108): Resetting controller...:
twa0: INFO: (0x04: 0x0001): : SoftResetCount=1
twa0: INFO: (0x16: 0x1107): Controller reset done!:
twa0: INFO: (0x04: 0x000c): : unit=0
lspci -vv :
03:0b.0 RAID bus controller: 3ware Inc 9xxx-series SATA-RAID
Subsystem: 3ware Inc 9xxx-series SATA-RAID
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (2250ns min), Cache Line Size 08
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at b000
Region 1: Memory at fb800000 (64-bit, non-prefetchable)
Region 3: Memory at fb000000 (64-bit, prefetchable)
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=1
Status: Dev=ff:1f.0 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
And on the risk of sounding stupid, doesn't this "64bit+" mean that freebsd is using it
"with 64 bit" support?
And if it indeed does, is there any way to force it off?
If there isn't a simple solution, were just getting a motherboard with 64bit
pci slot.
Thanks
-Ville
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
