On Sun, Aug 13, 2006 at 04:30:31PM +0200, Zoran Kolic wrote: > Hi all! > I would like to add nfpm device > into kernel, but cannot find it > in source. Googling for awile, > I've found a lot of posts on nfsmb, > broken compilings... > In this moment looks to me that the > correct way should be to add smbus, > smb and nfpm. Since nfsmb is taken > from sensors, do I compile zombie > device. > Mobo is asus nforce3 k8n 250, 6.1 > and amd64. > > [EMAIL PROTECTED]:1:1: class=0x0c0500 card=0x813f1043 chip=0x00e410de > rev=0xa1 hdr=0x00 > vendor = 'NVIDIA Corporation' > device = 'nForce PCI SMB Controller' > class = serial bus > subclass = SMBus > You motherboard is nForce3 based so you don't need nfpm. nfpm is just an alias for amdpm, so this is probably why you can't find its sources:
# grep nfpm sys/conf/files pci/amdpm.c optional amdpm pci | nfpm pci # amdpm AMD 756 Power Management Unit # amdsmb AMD 8111 SMBus 2.0 Controller # nfpm NVIDIA nForce Power Management Unit # nfsmb NVIDIA nForce2/3/4 MCP SMBus 2.0 Controller I've written amdsmb for Asus SK8N, only to find out that there are no sensors attached to it. :-) Cheers, -- Ruslan Ermilov [EMAIL PROTECTED] FreeBSD committer
pgp4xuOGLYJxm.pgp
Description: PGP signature
