> You can override the country code but the potential values > depends on the regdomain. I thought hw.ath.countrycode was > r/w but it appears you can only set via the tunable api (kenv > hw.ath.countrycode=XXX). The dev.ath mib must be r/o since > you cannot (yet) change this after attaching the device (the > driver does not implement it). Adding support to do this is > not a big deal but hasn't been done; feel free to supply a patch. >
Ok, I tried to set via the tunable api kenv through loader, but this is the result: # ifconfig ath0 ifconfig: interface ath0 does not exist # ifconfig ath1 ifconfig: interface ath1 does not exist ath0: <Atheros 5212> mem 0x80000000-0x8000ffff irq 12 at device 13.0 on pci0 ath0: unable to collect channel list from hal; regdomain likely 96 country code 203 device_attach: ath0 attach returned 22 ath1: <Atheros 5212> mem 0x800c0000-0x800cffff irq 9 at device 17.0 on pci0 ath1: unable to collect channel list from hal; regdomain likely 96 country code 203 device_attach: ath1 attach returned 22 ath0: <Atheros 5212> mem 0x80000000-0x8000ffff irq 12 at device 13.0 on pci0 ath0: unable to collect channel list from hal; regdomain likely 96 country code 203 device_attach: ath0 attach returned 22 ath1: <Atheros 5212> mem 0x800c0000-0x800cffff irq 9 at device 17.0 on pci0 ath1: unable to collect channel list from hal; regdomain likely 96 country code 203 device_attach: ath1 attach returned 22 # sysctl hw.ath hw.ath.hal.version: 0.9.17.2 hw.ath.hal.dma_brt: 2 hw.ath.hal.sw_brt: 10 hw.ath.hal.swba_backoff: 0 hw.ath.dwell: 200 hw.ath.calibrate: 30 hw.ath.outdoor: 1 hw.ath.xchanmode: 1 hw.ath.countrycode: 203 hw.ath.regdomain: 0 -- not setted to 96 ???? hw.ath.rxbuf: 40 hw.ath.txbuf: 100 So ? I don´t know. :) _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"