watchdogs mean that the transmit ring is not being cleaned, so the
question is what is your machine doing at 100% cpu, if its that busy
the network watchdogs may just be a side effect and not the real
problem?
I get them with a completely idle machine. My home directory is mounted
via NFS (from FreeBSD 6.1 on an amd64 machine), and with the kernel from
earlier this week, the machine would just hang for 30 seconds to a
couple of minutes. A slew of "watchdog timeout" messages would appear.
Then I'd get a moment's responsiveness out of the machine, then
another long wait, then a moment's responsiveness, then a long wait...
The machine would never recover from this cycle (at least, so far as I
was patient enough to wait).
Going back to a kernel dated late July resolved everything.
Someone else asked me for the hardware version of my em0 board...
[EMAIL PROTECTED]:10:0: class=0x020000 card=0x002e8086 chip=0x100e8086 rev=0x02
hdr=0x00 vendor = 'Intel Corporation'
device = '82540EM Gigabit Ethernet Controller'
class = network
subclass = ethernet
-David.
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
