OpenBSD uses on sis0 MTU=1500
and lo0= MTU=33224
Am 18.09.2006, 20:56 Uhr, schrieb Robert Watson <[EMAIL PROTECTED]>:
On Mon, 18 Sep 2006, Ingo wrote:
heres the output of route get 192.168.0.11:
localhost# route get 192.168.0.11
route to: 192.168.0.11
destination: 192.168.0.0
mask: 255.255.255.0
interface: sis0
flags: <UP,DONE,CLONING>
recvpipe sendpipe ssthresh rtt,msec rttvar hopcount mtu
expire
0 0 0 0 0 0
1500 -69
I set the lo0 interface as you recommended from 16384 to 1500. Now I
have
the same thoughput as with the IP (~2.3MB/s).
Shouldn´t FreeBSD recognize, that it is it´s local address, like openbsd
does?
What MTU does OpenBSD use on its loopback interface as compared to the
network interface?
Robert N M Watson
Computer Laboratory
University of Cambridge
Greetings
Am 18.09.2006, 15:52 Uhr, schrieb Robert Watson <[EMAIL PROTECTED]>:
On Wed, 13 Sep 2006, Ingo wrote:
I`ve some problems with the network performance on my Soekris NET
4801.
(Freebsd 6.1 release-p3)
When I start "netio" on the soekris and do a "netio localhost", I get
about
8.4 MB/sec, and when I start with "netio 192.168.0.11"(it´s localhost
address) I get only ~2.3 MB/sec. That´s what top says when I do:
What does "route get 192.168.0.11" return?
What happens if you force the localhost MTU from whatever the default
is
(most
likely 16k) to the same as the ethernet interface?
Robert N M Watson
Computer Laboratory
University of Cambridge
localhost
CPU states: 2.3% user, 0.0% nice, 72.5% system, 25.2% interrupt,
0.0%
idle
192.168.0.11
CPU states: 1.2% user, 0.0% nice, 46.3% system, 52.5% interrupt,
0.0%
idle
As you can see, the interrupt load is more than doubled when I use
the Ip
address, and
I´ve no idea why.
Here are some other throughput results of the soekris:
openbsd# ftp 192.16.8.0.20 2.0 MB/sec
openbsd# iperf localhost 1.4 Mbit/sec
openbsd# iperf 192.168.0.11(it´s localhost address) 1.4 Mbit/sec
openbsd# netperf localhost 70MB/sec
openbsd# netperf 192.168.0.11(it´s localhost address) 70MB/sec
freebsd# ftp 192.168.0.20 2.3 MB/sec
Freebsd# iperf localhost 45 Mbit/sec
Freebsd# iperf 192.168.0.11 (it´s localhost address) 19 Mbit/sec
Freebsd# netperf localhost 67 Mbit/sec
Freebsd# netperf 192.168.0.11 (it´s localhost address) 19 Mbit/sec
What causes the difference between localhost and the ip address on
Freebsd?
On Openbsd there is no diffenerce at all.
Greetings
--
Erstellt mit Operas revolutionärem E-Mail-Modul:
http://www.opera.com/mail/
_______________________________________________
freebsd-performance@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-performance
To unsubscribe, send any mail to
"[EMAIL PROTECTED]"
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
