On Mon, Nov 06, 2006 at 11:31:57AM +0200, Anton - Valqk wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Well,
> the card is connected to a switch that is manageble and the port is set to
> 10Mbit Full duplex on purpose.
Your ifconfig output below shows halfduplex!
> I'm not setting the port speed manual - is that a problem when the port is
> not 100mbit/fd?
> This is the ifconfig output:
>
> fxp0: flags=18843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,POLLING> mtu 1500
> options=48<VLAN_MTU,POLLING>
> inet 112.15.128.88 netmask 0xffffff00 broadcast 112.15.128.255
> inet6 fe80::208:c7ff:fe5b:54f2%fxp0 prefixlen 64 scopeid 0x2
> ether 00:08:c7:5b:54:a5
> media: Ethernet autoselect (10baseT/UTP)
^^^ like here.
Wilko
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
