Scott Long wrote:
Vivek Khera wrote:
Some time long ago, someone posted a very short C program that probes
the LSI controller and spits out this kind of output:
[EMAIL PROTECTED] amrstat
Drive 0: 34.18 GB, RAID1 <writeback,no-read-ahead,no-adaptative-io>
optimal
Drive 1: 102.54 GB, RAID1 <writeback,no-read-ahead,no-adaptative-io>
optimal
This is the kind of output I'd love to get from my adaptec
controllers, too. This can be trivially scripted and hooked into a
monitoring system like nagios.
The aaccli tool is a curses based app (despite the "cli" in the name)
and scripting it is damn near impossible. It doesn't even read
commands from stdin!
Yes, scripting it is possible, and it does have a non-interactive mode.
Try the following:
printf "open aac0\ncontroller details\nexit\n" | aaccli
I have been trying to find a similar solution for aac controllers that
will display the status of the volumes that the controller has
configured (E.g. Optimal, Degraded, Failed etc...). So far the only way
I have found to do it is to store the output of:
printf "open aac0\ncontainer list\nexit\n" | aaccli
For a known good status and then periodiacly check the output of the
above command with the same status.
Is there a better way to do this?
Tom
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"