----- Original Message -----
From: "Richard Coleman" <[EMAIL PROTECTED]>
To: <freebsd-stable@freebsd.org>
Sent: Monday, November 27, 2006 5:23 AM
Subject: Large msdosfs disk will not mount on RELENG_6
I just bought a large external hard drive for home backups (500g Western
Digital My Book). When I plug it in to my machine (RELENG_6 from about a
week ago), the system sees the device just fine:
Nov 26 22:03:21 neptune kernel: umass0: Western Digital External HDD, rev
2.00/1.06, addr 2
Nov 26 22:03:21 neptune kernel: uhid1: Western Digital External HDD, rev
2.00/1.06, addr 2, iclass 8/6
Nov 26 22:03:21 neptune kernel: da0 at umass-sim0 bus 0 target 0 lun 0
Nov 26 22:03:21 neptune kernel: da0: <WD 5000YS External 106a> Fixed
Direct Access SCSI-4 device
Nov 26 22:03:21 neptune kernel: da0: 40.000MB/s transfers
Nov 26 22:03:21 neptune kernel: da0: 476940MB (976773168 512 byte sectors:
255H 63S/T 60801C)
But when I try to mount the drive (mount -t msdos /dev/da0 /mnt), the
system gives the following error:
Nov 26 22:06:41 neptune kernel: mountmsdosfs(): disk too big, sorry
I was surprised to see a file system limitation on FreeBSD that Windows
does not have. I will probably reformat the system to ufs2, but thought I
would mention this error message. I'm sure these drives will become
increasingly common.
Richard Coleman
[EMAIL PROTECTED]
I am very suprised at all that windows would allow you to format a 500G
drive into a single 500G FAT32 partition.
As far as I am aware windows 2000 and xp will only allow you to format up to
a 32G dive with FAT32. Any bigger and it will force you to use NTFS. The
other strange thing is tht you are trying to mount /dev/da0 and not
/dev/de0s1.
How did you format this drive ?
-Clay
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"