We have a RELENG_6 amd64 box that has been experiencing lockups/panics every 4 days or so. The box is at a remote location and trying to get a full trace has been nigh impossible with the staffing constraints. As such I would like to set up a serial console (using another FreeBSD box and minicom or cu). I would like to verify that the following will work to allow a) the other FreeBSD box to have a terminal session via COM1 b) have it work regardless of whether a keyboard and/or monitor is plugged into the target box and c) still allow terminal redirection to internal or serial console if a keyboard is attached :
/boot/loader.conf hint.sio.0.flags="0x30" console="comconsole,vidconsole" boot_multicons="YES" boot_console="YES" comsconsole_speed="19200" /etc/ttys ttyd0 "/usr/libexec/getty std.19200" vt100 on secure As this is basically a 6.2 system, I assume I don't need to do anything re: boot blocks or /etc/make.conf or the like? Kernel has already been built with options DDB, options KDB_UNATTENDED, options KDB, options KDB_TRACE. Would the modifications to the 2 files listed above be sufficient to meet my wishes above and allow me to see the panic to terminal when the system does panic (and allow me to even trace, etc via the kdb debugger) ? Thanks, Sven _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
