On Thu, 25 Jan 2007 15:36:33 +0000 Pete French <[EMAIL PROTECTED]> wrote: > I have a machine with two interfaces in it - bge0 and beg1. I now > find I need to usse ng_fec to make these into one interface due to > the way out networking contractors are installign a new site. > Seems like no problem from the command line, but what I can't > find anywhere in the documentation is how to make this happen > at boot time using rc.conf. I am assuming my line which > looks like: > ifconfig_em0="inet 172.16.1.6 netmask 255.255.0.0" > becomes > ifconfig_fec0="inet 172.16.1.6 netmask 255.255.0.0" > but obviously I need to do something to create fec0 before > that happens. Preseumably something like cloned_interfaces="fce0", > but where does it get the parameters from to create the interface ?
SEE ALSO: http://www.freebsd.org/cgi/query-pr.cgi?pr=conf/104884 If you apply this patch, you can use ng_fec like following in your /etc/rc.conf: fec_interfaces="fec0" fecconfig_fec0="bge0 bge1" ifconfig_fec0="inet 172.16.1.6 netmask 255.255.0.0" _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"