Hmmmm.... I have a Dual-core (one physical package) Intel motherboard machine here that's working fine (6.2-STABLE)
FreeBSD 6.2-STABLE #3: Wed Feb 28 16:11:56 CST 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/KSD-SMP kern.timecounter.smp_tsc: 0 kern.smp.maxcpus: 16 kern.smp.active: 1 kern.smp.disabled: 0 kern.smp.cpus: 2 kern.smp.forward_signal_enabled: 1 kern.smp.forward_roundrobin_enabled: 1 I beat it up pretty hard too; its got a fairly active Postgres database on it, multiple RAID spindles under Gmirror, runs web services, firewall functions, multiple serial ports on USB adapters, etc. -- -- Karl Denninger ([EMAIL PROTECTED]) Internet Consultant & Kids Rights Activist http://www.denninger.net My home on the net - links to everything I do! http://scubaforum.org Your UNCENSORED place to talk about DIVING! http://genesis3.blogspot.com Musings Of A Sentient Mind On Wed, Mar 07, 2007 at 11:10:49AM -0500, Sam Baskinger wrote: > Adding a datapoint: Dell 1950s exhibit similar behaviour but have 2 > cores in a single physical CPU. > > Hope this helps the discussion along. > > Sam Baskinger > Software Engineer > > Lumeta - Securing the Network in the Face of Change > > > Ivan Voras wrote: > >Continuing my problems with the IBM blade: Booting with ACPI module > >enabled (btw. live boot CD with sysinstall doesn't load ACPI, but the > >installed system does?) hangs the system somewhere after first USB bus > >is found (booting verbose doesn't show any new lines before or after > >this step). It appears to be a real hang instead of a timeout because I > >left it 30 minutes and it didn't continue. > > > >Booting without ACPI on the other hand doesn't find all the CPU's :( > > > >Here's sysctl output: > > > >>sysctl -a | grep smp > >kern.timecounter.smp_tsc: 0 > >kern.smp.forward_roundrobin_enabled: 1 > >kern.smp.forward_signal_enabled: 1 > >kern.smp.cpus: 1 > >kern.smp.disabled: 0 > >kern.smp.active: 0 > >kern.smp.maxcpus: 16 > > > > > >Here's the mptable -dmesg output: > > > > > > > >=============================================================================== > > > >MPTable > > > >------------------------------------------------------------------------------- > > > >MP Floating Pointer Structure: > > > > location: EBDA > > physical address: 0x0009d140 > > signature: '_MP_' > > length: 16 bytes > > version: 1.4 > > checksum: 0xfe > > mode: Virtual Wire > > > >------------------------------------------------------------------------------- > > > >MP Config Table Header: > > > > physical address: 0x0009e9b0 > > signature: 'PCMP' > > base table length: 388 > > version: 1.4 > > checksum: 0x77 > > OEM ID: 'IBM ENSW' > > Product ID: 'LEWIS SMP ' > > OEM table pointer: 0x00000000 > > OEM table size: 0 > > entry count: 37 > > local APIC address: 0xfee00000 > > extended table length: 408 > > extended table checksum: 159 > > > >------------------------------------------------------------------------------- > > > >MP Config Base Table Entries: > > > >-- > >Processors: APIC ID Version State Family Model Step > >Flags > > 0 0x10 BSP, usable 15 1 2 > > 0x0301 > > 2 0x10 AP, usable 15 1 2 > > 0x0301 > > 1 0x10 AP, usable 15 1 2 > > 0x0301 > > 3 0x10 AP, usable 15 1 2 > > 0x0301 > >-- > >Bus: Bus ID Type > > 0 PCI > > 1 PCI > > 2 PCI > > 3 PCI > > 4 PCI > > 5 PCI > > 6 PCI > > 7 PCI > > 8 PCI > > 9 ISA > >-- > >I/O APICs: APIC ID Version State Address > > 14 0x11 usable 0xfec00000 > > 13 0x11 usable 0xfec02000 > >-- > >I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID > >PIN# > > INT conforms conforms 9 1 14 > > 1 > > INT conforms conforms 9 0 14 > > 2 > > INT conforms conforms 9 4 14 > > 4 > > INT conforms conforms 9 6 14 > > 6 > > INT active-hi edge 9 8 14 > > 8 > > INT conforms conforms 9 11 14 > > 11 > > INT conforms conforms 9 12 14 > > 12 > > INT conforms conforms 9 13 14 > > 13 > > INT conforms conforms 9 14 14 > > 14 > > INT conforms conforms 9 15 14 > > 15 > > INT conforms conforms 0 3:A 14 > > 3 > > INT conforms conforms 0 3:A 14 > > 3 > > INT conforms conforms 0 3:A 14 > > 3 > > INT conforms conforms 0 5:A 13 > > 0 > > INT conforms conforms 2 4:A 13 > > 1 > > INT conforms conforms 2 5:A 13 > > 2 > > INT conforms conforms 3 4:A 13 > > 3 > > INT conforms conforms 3 5:A 13 > > 4 > > INT conforms conforms 3 5:B 13 > > 5 > >-- > >Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID > >PIN# > > NMI conforms conforms 9 0 255 > > 1 > > ExtINT conforms conforms 9 0 255 > > 0 > > > >------------------------------------------------------------------------------- > > > >MP Config Extended Table Entries: > > > >-- > >System Address Space > > bus ID: 0 address type: memory address > > address base: 0xa0000 > > address range: 0x20000 > >-- > >System Address Space > > bus ID: 0 address type: memory address > > address base: 0xf8000000 > > address range: 0x2000000 > >-- > >System Address Space > > bus ID: 0 address type: prefetch address > > address base: 0xf0000000 > > address range: 0x8000000 > >-- > >System Address Space > > bus ID: 0 address type: memory address > > address base: 0xea000000 > > address range: 0x6000000 > >-- > >System Address Space > > bus ID: 0 address type: memory address > > address base: 0xe7000000 > > address range: 0x1100000 > >-- > >System Address Space > > bus ID: 0 address type: memory address > > address base: 0xe5000000 > > address range: 0x1000000 > >-- > >System Address Space > > bus ID: 0 address type: memory address > > address base: 0xe4000000 > > address range: 0x1000000 > >-- > >System Address Space > > bus ID: 0 address type: memory address > > address base: 0xe3000000 > > address range: 0x1000000 > >-- > >System Address Space > > bus ID: 0 address type: memory address > > address base: 0xe2000000 > > address range: 0x1000000 > >-- > >System Address Space > > bus ID: 0 address type: memory address > > address base: 0xe1000000 > > address range: 0x1000000 > >-- > >System Address Space > > bus ID: 0 address type: I/O address > > address base: 0x0 > > address range: 0x3b0 > >-- > >System Address Space > > bus ID: 0 address type: I/O address > > address base: 0x3b0 > > address range: 0xc > >-- > >System Address Space > > bus ID: 0 address type: I/O address > > address base: 0x3bc > > address range: 0x4 > >-- > >System Address Space > > bus ID: 0 address type: I/O address > > address base: 0x3c0 > > address range: 0x20 > >-- > >System Address Space > > bus ID: 0 address type: I/O address > > address base: 0x3e0 > > address range: 0x3c20 > >-- > >System Address Space > > bus ID: 0 address type: I/O address > > address base: 0x4000 > > address range: 0x1000 > >-- > >-- > >Bus Heirarchy > > bus ID: 1 bus info: 0x00 parent bus ID: 0 > >-- > >Bus Heirarchy > > bus ID: 2 bus info: 0x00 parent bus ID: 1 > >-- > >Bus Heirarchy > > bus ID: 3 bus info: 0x00 parent bus ID: 0 > >-- > >Bus Heirarchy > > bus ID: 4 bus info: 0x00 parent bus ID: 0 > >-- > >Bus Heirarchy > > bus ID: 5 bus info: 0x00 parent bus ID: 0 > >-- > >Bus Heirarchy > > bus ID: 6 bus info: 0x00 parent bus ID: 0 > >-- > >Bus Heirarchy > > bus ID: 7 bus info: 0x00 parent bus ID: 0 > >-- > >Bus Heirarchy > > bus ID: 8 bus info: 0x00 parent bus ID: 0 > >-- > >Bus Heirarchy > > bus ID: 9 bus info: 0x01 parent bus ID: 0 > >-- > >Compatibility Bus Address > > bus ID: 0 address modifier: add > > predefined range: 0x00000000 > >-- > >Compatibility Bus Address > > bus ID: 0 address modifier: add > > predefined range: 0x00000001 > > > >------------------------------------------------------------------------------- > > > >dmesg output: > > > >Copyright (c) 1992-2007 The FreeBSD Project. > >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights reserved. > >FreeBSD is a registered trademark of The FreeBSD Foundation. > >FreeBSD 6.2-STABLE #0: Wed Mar 7 15:08:28 CET 2007 > > root@:/usr/obj/usr/src/sys/SMP > >Timecounter "i8254" frequency 1193182 Hz quality 0 > >CPU: Dual-Core AMD Opteron(tm) Processor 2216 HE (2400.10-MHz K8-class CPU) > > Origin = "AuthenticAMD" Id = 0x40f12 Stepping = 2 > > > >Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > > Features2=0x2001<SSE3,CX16> > > AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> > > AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> > > Cores per package: 2 > >real memory = 4815060992 (4592 MB) > >avail memory = 4130750464 (3939 MB) > >kbd1 at kbdmux0 > >ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > >cpu0 on motherboard > >pcib0: <Host to PCI bridge> pcibus 0 on motherboard > >pci0: <PCI bus> on pcib0 > >pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > >pci1: <PCI bus> on pcib1 > >pcib2: <PCI-PCI bridge> at device 13.0 on pci1 > >pci2: <PCI bus> on pcib2 > >bce0: <Broadcom NetXtreme II BCM5706 1000Base-SX (A2), v0.9.6> mem > >0xea000000-0xebffffff irq 5 at device 4.0 on pci2 > >bce0: ASIC ID 0x57060021; Revision (A2); PCI-X 64-bit 133MHz > >miibus0: <MII bus> on bce0 > >gentbi0: <Generic ten-bit interface> on miibus0 > >gentbi0: 1000baseSX, 1000baseSX-FDX, auto > >bce0: Ethernet address: 00:14:5e:6d:2d:74 > >bce1: <Broadcom NetXtreme II BCM5706 1000Base-SX (A2), v0.9.6> mem > >0xec000000-0xedffffff irq 10 at device 5.0 on pci2 > >bce1: ASIC ID 0x57060021; Revision (A2); PCI-X 64-bit 133MHz > >miibus1: <MII bus> on bce1 > >gentbi1: <Generic ten-bit interface> on miibus1 > >gentbi1: 1000baseSX, 1000baseSX-FDX, auto > >bce1: Ethernet address: 00:14:5e:b3:2a:38 > >isab0: <PCI-ISA bridge> at device 2.2 on pci0 > >isa0: <ISA bus> on isab0 > >ohci0: <OHCI (generic) USB controller> port 0x3000-0x30ff mem > >0xf9fff000-0xf9ffffff irq 3 at device 3.0 on pci0 > >ohci0: [GIANT-LOCKED] > >usb0: OHCI version 1.0, legacy support > >usb0: SMM does not respond, resetting > >usb0: <OHCI (generic) USB controller> on ohci0 > >usb0: USB revision 1.0 > >uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > >uhub0: 2 ports with 2 removable, self powered > >ohci1: <OHCI (generic) USB controller> port 0x3100-0x31ff mem > >0xf9ffe000-0xf9ffefff irq 3 at device 3.1 on pci0 > >ohci1: [GIANT-LOCKED] > >usb1: OHCI version 1.0, legacy support > >usb1: <OHCI (generic) USB controller> on ohci1 > >usb1: USB revision 1.0 > >uhub1: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > >uhub1: 2 ports with 2 removable, self powered > >ehci0: <EHCI (generic) USB 2.0 controller> port 0x3200-0x32ff mem > >0xf9ffd000-0xf9ffdfff irq 3 at device 3.2 on pci0 > >ehci0: [GIANT-LOCKED] > >usb2: EHCI version 1.0 > >usb2: companion controllers, 2 ports each: usb0 usb1 > >usb2: <EHCI (generic) USB 2.0 controller> on ehci0 > >usb2: USB revision 2.0 > >uhub2: (0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > >uhub2: 4 ports with 4 removable, self powered > >uhub3: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.07, addr 2 > >uhub3: multiple transaction translators > >uhub3: 2 ports with 2 removable, self powered > >uhub4: Cypress Semiconductor 4 Port Hub, class 9/0, rev 1.10/0.01, addr 3 > >uhub4: 4 ports with 4 removable, self powered > >umass0: TEAC TEAC FD-05PUB, rev 2.00/0.00, addr 4 > >umass1: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 5 > >umass1: Get Max Lun not supported (STALLED) > >pci0: <display, VGA> at device 5.0 (no driver attached) > >pcib3: <PCI-PCI bridge> at device 6.0 on pci0 > >pci3: <PCI bus> on pcib3 > >mpt0: <LSILogic SAS/SATA Adapter> port 0x4000-0x40ff mem > >0xe8010000-0xe8013fff,0xe8000000-0xe800ffff irq 9 at device 4.0 on pci3 > >mpt0: [GIANT-LOCKED] > >mpt0: MPI Version=1.5.12.0 > >mpt0: mpt_cam_event: 0x16 > >mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). > >mpt0: mpt_cam_event: 0x12 > >mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required). > >mpt0: mpt_cam_event: 0x16 > >mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). > >pci3: <serial bus, Fibre Channel> at device 5.0 (no driver attached) > >pci3: <serial bus, Fibre Channel> at device 5.1 (no driver attached) > >pcib4: <PCI-PCI bridge> at device 7.0 on pci0 > >pci4: <PCI bus> on pcib4 > >pcib5: <PCI-PCI bridge> at device 8.0 on pci0 > >pci5: <PCI bus> on pcib5 > >pcib6: <PCI-PCI bridge> at device 9.0 on pci0 > >pci6: <PCI bus> on pcib6 > >pcib7: <PCI-PCI bridge> at device 10.0 on pci0 > >pci7: <PCI bus> on pcib7 > >pcib8: <PCI-PCI bridge> at device 11.0 on pci0 > >pci8: <PCI bus> on pcib8 > >orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0 > >atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > >atkbd0: <AT Keyboard> irq 1 on atkbdc0 > >kbd0 at atkbd0 > >atkbd0: [GIANT-LOCKED] > >ppc0: cannot reserve I/O port range > >sc0: <System console> at flags 0x100 on isa0 > >sc0: VGA <16 virtual consoles, flags=0x300> > >sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > >sio0: type 16550A > >sio1: configured irq 3 not in bitmap of probed irqs 0 > >sio1: port may not be enabled > >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > >ukbd0: IBM IBM MM2, rev 1.10/0.01, addr 2, iclass 3/1 > >kbd2 at ukbd0 > >ums0: IBM IBM MM2, rev 1.10/0.01, addr 2, iclass 3/1 > >ums0: 3 buttons and Z dir. > >Timecounter "TSC" frequency 2400100239 Hz quality 800 > >Timecounters tick every 1.000 msec > >da1 at mpt0 bus 0 target 0 lun 0 > >da1: <IBM-ESXS MAY2073RC T107> Fixed Direct Access SCSI-5 device > >da1: 300.000MB/s transfers, Tagged Queueing Enabled > >da1: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C) > >cd0 at umass-sim1 bus 1 target 0 lun 0 > >cd0: <HL-DT-ST RW/DVD GCC-4244N 1.02> Removable CD-ROM SCSI-0 device > >cd0: 1.000MB/s transfers > >cd0: Attempt to query device size failed: NOT READY, Medium not present > >(da0:umass-sim0:0:0:0): got CAM status 0x4 > >(da0:umass-sim0:0:0:0): fatal error, failed to attach to device > >(da0:umass-sim0:0:0:0): lost device > >(da0:umass-sim0:0:0:0): removing device entry > >Trying to mount root from ufs:/dev/da1s1a > >stray irq7 > >bce0: link state changed to DOWN > >vlan0: link state changed to DOWN > >bce0: link state changed to UP > >vlan0: link state changed to UP > >stray irq7 > >too many stray irq 7's: not logging anymore > >mpt0: QUEUE FULL EVENT: Bus 0x00 Target 0x00 Depth 129 > > > > > > > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > > > %SPAMBLOCK-SYS: Matched [EMAIL PROTECTED], message ok %SPAMBLOCK-SYS: Matched [EMAIL PROTECTED], message ok _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"