Good Day everyone. I have this one system setup with If_bridge to filter traffic. It does work quite good. I am running FreeBSD 6.2 but as a TINYBSD Image. The one problem I have is I place the machine at the perimeter on our network with 27 seats. At that time anywhere between 15min - 24hours the entire system goes into a Hard Lock (Physical reboot needed). The thing is there is no logs or kernel panics or anything. No IRQ Conflicts exists.
I am looking for any inputs or any ways to go after looking how to even diagnosed this. Here is a copy of my dmesg. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE #0: Wed May 9 17:48:30 UTC 2007 root@:/usr/obj/usr/src/sys/TINYBSD WARNING: MPSAFE network stack disabled, expect reduced performance. ACPI APIC Table: <IntelR AWRDACPI> Timecounter "i8254" frequency 1193520 Hz quality 0 CPU: Intel(R) Celeron(R) CPU 2.80GHz (2792.85-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf34 Stepping = 4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,<b14>> real memory = 535691264 (510 MB) avail memory = 519000064 (494 MB) ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard acpi0: <IntelR AWRDACPI> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci1: <ACPI PCI bus> on pcib1 em0: <Intel(R) PRO/1000 Network Connection Version - 6.3.9> port 0xc000-0xc01f mem 0xf2000000-0xf201ffff irq 18 at device 1.0 on pci1 em0: Ethernet address: 00:30:48:86:97:62 em0: [GIANT-LOCKED] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci0: <serial bus, USB> at device 29.0 (no driver attached) pci0: <serial bus, USB> at device 29.1 (no driver attached) pci0: <base peripheral> at device 29.4 (no driver attached) pci0: <base peripheral, interrupt controller> at device 29.5 (no driver attached) pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <display, VGA> at device 9.0 (no driver attached) em1: <Intel(R) PRO/1000 Network Connection Version - 6.3.9> port 0xd100-0xd13f mem 0xf1000000-0xf101ffff irq 19 at device 10.0 on pci3 em1: Ethernet address: 00:30:48:86:97:63 em1: [GIANT-LOCKED] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel 6300ESB SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f irq 18 at device 31.2 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2792849472 Hz quality 800 Timecounters tick every 1.000 msec IP Filter: v4.1.13 initialized. Default = pass all, Logging = enabled ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging limited to 100 packets/entry by default ad0: 977MB <SanDisk SDCFH-1024 HDX 3.19> at ata0-master PIO4 ad2: 76319MB <Seagate ST380811AS 3.AAB> at ata1-master SATA150 Trying to mount root from ufs:/dev/ad0s1a em1: link state changed to DOWN em0: link state changed to DOWN bridge0: Ethernet address: 46:e0:af:c9:e6:b7 em0: promiscuous mode enabled em1: promiscuous mode enabled em0: link state changed to UP em1: link state changed to UP em1: link state changed to DOWN em1: link state changed to UP Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...1 0 0 done All buffers synced. Uptime: 47m5s Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE #0: Wed May 9 17:48:30 UTC 2007 root@:/usr/obj/usr/src/sys/TINYBSD WARNING: MPSAFE network stack disabled, expect reduced performance. ACPI APIC Table: <IntelR AWRDACPI> Timecounter "i8254" frequency 1193516 Hz quality 0 CPU: Intel(R) Celeron(R) CPU 2.80GHz (2792.84-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf34 Stepping = 4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,<b14>> real memory = 535691264 (510 MB) avail memory = 519000064 (494 MB) ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard acpi0: <IntelR AWRDACPI> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci1: <ACPI PCI bus> on pcib1 em0: <Intel(R) PRO/1000 Network Connection Version - 6.3.9> port 0xc000-0xc01f mem 0xf2000000-0xf201ffff irq 18 at device 1.0 on pci1 em0: Ethernet address: 00:30:48:86:97:62 em0: [GIANT-LOCKED] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci0: <serial bus, USB> at device 29.0 (no driver attached) pci0: <serial bus, USB> at device 29.1 (no driver attached) pci0: <base peripheral> at device 29.4 (no driver attached) pci0: <base peripheral, interrupt controller> at device 29.5 (no driver attached) pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <display, VGA> at device 9.0 (no driver attached) em1: <Intel(R) PRO/1000 Network Connection Version - 6.3.9> port 0xd100-0xd13f mem 0xf1000000-0xf101ffff irq 19 at device 10.0 on pci3 em1: Ethernet address: 00:30:48:86:97:63 em1: [GIANT-LOCKED] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel 6300ESB SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f irq 18 at device 31.2 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2792842836 Hz quality 800 Timecounters tick every 1.000 msec IP Filter: v4.1.13 initialized. Default = pass all, Logging = enabled ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging limited to 100 packets/entry by default ad0: 977MB <SanDisk SDCFH-1024 HDX 3.19> at ata0-master PIO4 ad2: 76319MB <Seagate ST380811AS 3.AAB> at ata1-master SATA150 Trying to mount root from ufs:/dev/ad0s1a _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"