Vivek Khera wrote: > I have a shiny new Sun X4100 here and it works pretty well (except that > there is a bug in the ILOM bios that refuses to let the serial port > console run at 115200!!!) > > I attached an external RAID array using an LSI fibre channel card, and > now the boot disk is not found after the kernel boots. Ie, it can't > find the root volume. This is because the fibre channel card is probed > as mpt0 and the on-board disks are connected to mpt2. (Where's mpt1? > no idea.) Once the RAID volume was initialized, the ordering of the > disk device names changed. > > Is there some way to force the boot drive controller to be probed first > and be mpt0? Or is there some way to force the boot drive to be a fixed > device name? > > I'm planning to play with the RAID configuraitons and change partitions > and add logical drives, etc., so this will be painful to reconfigure the > OS every time I reconfigure the RAID. Any advice will be appreciated. > Thanks! > > I'm running 6.2/amd64 from a fresh CD install. > > > > > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= > Vivek Khera, Ph.D. Khera Communications, Inc. > Internet: [EMAIL PROTECTED] Rockville, MD +1-301-869-4449 x806 > > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "[EMAIL PROTECTED]"
I believe you can use the following in your kernel config: options ROOTDEVNAME=\"ufs:da2s1" Or whatever the appropriate device/slice for your mpt2 controller. -Proto _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"