I get "Fatal double fault" error when writing to a filesystem mounted from NFS server.
Both NFS server and client are running 6.2-RELEASE-p7. I've attached dmesg from client and kernel config from server and client. Both have same these NFS options in /etc/rc.conf rpcbind_enable="YES" nfs_server_enable="YES" nfs_client_enable="YES" nfs_reserved_port_only="YES" rpc_lockd_enable="YES" rpc_statd_enable="YES" I have three kernel crash dumps available. The panic message is same in vmcore.0 and .1 Fatal double fault: eip = 0xc0608015 esp = 0xe3955000 ebp = 0xe3955020 panic: double fault Panic message in vmcore.2 has different eip and ebp values. Fatal double fault: eip = 0xc063242a esp = 0xe3955000 ebp = 0xe3955008 panic: double fault And here is backtrace from vmcore.2, which is identical to backtrace found in vmcore.0 and vmcore.1. # kgdb kernel.debug /home/crash/vmcore.2 Fatal double fault: eip = 0xc063242a esp = 0xe3955000 ebp = 0xe3955008 panic: double fault Uptime: 14m41s Dumping 1023 MB (2 chunks) chunk 0: 1MB (159 pages) ... ok chunk 1: 1023MB (261872 pages) 1007 991 975 959 943 927 911 895 879 863 847 831 815 799 783 767 751 735 719 703 687 671 655 639 623 607 591 575 559 543 527 511 495 479 463 447 431 415 399 383 367 351 335 319 303 287 271 255 239 223 207 191 175 159 143 127 111 95 79 63 47 31 15 #0 doadump () at pcpu.h:165 165 __asm __volatile("movl %%fs:0,%0" : "=r" (td)); (kgdb) bt #0 doadump () at pcpu.h:165 #1 0xc04edf2a in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:409 #2 0xc04ee1c0 in panic (fmt=0xc069618e "double fault") at /usr/src/sys/kern/kern_shutdown.c:565 #3 0xc0658fde in dblfault_handler () at /usr/src/sys/i386/i386/trap.c:866 #4 0x00000000 in ?? ()
Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE-p7 #81: Thu Aug 2 17:50:20 EEST 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/THUNDERBOLT Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) XP 2600+ (2088.08-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x681 Stepping = 1 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow> real memory = 1073676288 (1023 MB) avail memory = 1037500416 (989 MB) acpi0: <XPC AWRDACPI> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xe8080000-0xe8080fff irq 3 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xe8083000-0xe8083fff irq 5 at device 2.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ehci0: <NVIDIA nForce2 USB 2.0 controller> mem 0xe8086000-0xe80860ff irq 10 at device 2.2 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: <NVIDIA nForce2 USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 6 ports with 6 removable, self powered uhub3: vendor 0x050d product 0x0237, class 9/0, rev 2.00/0.00, addr 2 uhub3: multiple transaction translators uhub3: 7 ports with 7 removable, self powered ucom0: Prolific Technology Inc. USB-Serial Controller, rev 1.10/3.00, addr 3 ugen0: SCM Microsystems Inc. SCR3310 USB Smart Card Reader, rev 2.00/5.21, addr 4 nve0: <NVIDIA nForce MCP2 Networking Adapter> port 0xd000-0xd007 mem 0xe8087000-0xe8087fff irq 11 at device 4.0 on pci0 nve0: Ethernet address 00:30:1b:af:7d:cc miibus0: <MII bus> on nve0 rlphy0: <RTL8201L 10/100 media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto nve0: Ethernet address: 00:30:1b:af:7d:cc pci0: <multimedia, audio> at device 5.0 (no driver attached) pcm0: <nVidia nForce2> port 0xd400-0xd4ff,0xd800-0xd87f mem 0xe8081000-0xe8081fff irq 5 at device 6.0 on pci0 pcm0: <Avance Logic ALC650 AC97 Codec> pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0 pci1: <ACPI PCI bus> on pcib1 atapci0: <nVidia nForce2 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 9.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 fwohci0: <1394 Open Host Controller Interface> mem 0xe8084000-0xe80847ff,0xe8085000-0xe808503f irq 11 at device 13.0 on pci0 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:30:1b:30:1b:af:7e:30 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib2 nvidia0: <GeForce4 Ti 4400> mem 0xe4000000-0xe4ffffff,0xd0000000-0xd7ffffff,0xd8000000-0xd807ffff irq 10 at device 0.0 on pci3 nvidia0: [GIANT-LOCKED] acpi_tz0: <Thermal Zone> on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse Explorer, device ID 4 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd57ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2088076745 Hz quality 800 Timecounters tick every 1.000 msec ad0: 114473MB <Seagate ST3120026A 3.54> at ata0-master UDMA100 acd0: CDRW <PLEXTOR CD-R PX-320A/1.06> at ata1-master PIO4 Trying to mount root from ufs:/dev/ad0s3a WARNING: / was not properly dismounted WARNING: /tmp was not properly dismounted WARNING: /var was not properly dismounted WARNING: /usr was not properly dismounted WARNING: /home was not properly dismounted WARNING: /scratch was not properly dismounted All threads purged from ugen0.1 All threads purged from ugen0.2 All threads purged from ugen0.3
# # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.429.2.1 2005/07/18 12:23:41 kensmith Exp $ machine i386 #cpu I486_CPU #cpu I586_CPU cpu I686_CPU ident THUNDERBOLT # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols #options SCHED_ULE # ULE scheduler options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server #options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_GPT # GUID Partition Tables. options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. options ADAPTIVE_GIANT # Giant mutex is adaptive. #device apic # I/O APIC # Bus support. #device eisa device pci # Floppy drives #device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives #device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device ahd # AHA39320/29320 and onboard AIC79xx devices #device amd # AMD 53C974 (Tekram DC-390(T)) #device isp # Qlogic family #device ispfw # Firmware for QLogic HBAs- normally a module #device mpt # LSI-Logic MPT-Fusion #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') #device trm # Tekram DC395U/UW/F DC315U adapters #device adv # Advansys SCSI adapters #device adw # Advansys wide SCSI adapters #device aha # Adaptec 154x SCSI adapters #device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. #device bt # Buslogic/Mylex MultiMaster SCSI adapters #device ncv # NCR 53C500 #device nsp # Workbit Ninja SCSI-3 #device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required for SCSI) #device ch # SCSI media changers device da # Direct Access (disks) #device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) #device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers interfaced to the SCSI subsystem #device amr # AMI MegaRAID #device arcmsr # Areca SATA II RAID #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device ciss # Compaq Smart RAID 5* #device dpt # DPT Smartcache III, IV - See NOTES for options #device hptmv # Highpoint RocketRAID 182x #device iir # Intel Integrated RAID #device ips # IBM (Adaptec) ServeRAID #device mly # Mylex AcceleRAID/eXtremeRAID #device twa # 3ware 9000 series PATA/SATA RAID # RAID controllers #device aac # Adaptec FSA RAID #device aacp # SCSI passthrough for aac (requires CAM) #device ida # Compaq Smart RAID #device mlx # Mylex DAC960 family #device pst # Promise Supertrak SX6000 #device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor #device agp # support several AGP chipsets # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support #device cbb # cardbus (yenta) bridge #device pccard # PC Card (16-bit) bus #device cardbus # CardBus (32-bit) bus # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer #device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to the sio and/or ppc drivers): #device puc # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device em # Intel PRO/1000 adapter Gigabit Ethernet Card #device ixgb # Intel PRO/10GbE Ethernet Card #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support #device bfe # Broadcom BCM440x 10/100 Ethernet #device bge # Broadcom BCM570xx Gigabit Ethernet #device dc # DEC/Intel 21143 and various workalikes #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device lge # Level 1 LXT1001 gigabit Ethernet #device nge # NatSemi DP83820 gigabit Ethernet device nve # nVidia nForce MCP on-board Ethernet Networking #device pcn # AMD Am79C97x PCI 10/100(precedence over 'lnc') #device re # RealTek 8139C+/8169/8169S/8110S #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet #device ste # Sundance ST201 (D-Link DFE-550TX) #device ti # Alteon Networks Tigon I/II gigabit Ethernet #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') #device vge # VIA VT612x gigabit Ethernet #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. #device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards #device ex # Intel EtherExpress Pro/10 and Pro/10+ #device ep # Etherlink III based cards #device fe # Fujitsu MB8696x based cards #device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. #device lnc # NE2100, NE32-VL Lance Ethernet cards #device sn # SMC's 9000 series of Ethernet chips #device xe # Xircom pccard Ethernet # ISA devices that use the old ISA shims #device le # Wireless NIC cards #device wlan # 802.11 support #device an # Aironet 4500/4800 802.11 wireless NICs. #device awi # BayStack 660 and others #device ral # Ralink Technology RT2500 wireless NICs. #device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device sl # Kernel SLIP #device ppp # Kernel PPP #device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) #device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse #device ural # Ralink Technology RT2500USB wireless NICs #device urio # Diamond Rio 500 MP3 player #device uscanner # Scanners # USB Ethernet, requires miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet # FireWire support device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) #device fwe # Ethernet over FireWire (non-standard!) # Omat saadot options INCLUDE_CONFIG_FILE # Include this file in kernel device uplcom device ucom
# # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.429.2.2 2005/09/18 03:37:58 scottl Exp $ machine i386 cpu I486_CPU cpu I586_CPU cpu I686_CPU ident LIGHTNING # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols #options SCHED_ULE # ULE scheduler options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server #options NFS_ROOT # NFS usable as /, requires NFSCLIENT #options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_GPT # GUID Partition Tables. options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. options ADAPTIVE_GIANT # Giant mutex is adaptive. device apic # I/O APIC # Bus support. #device eisa device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives #device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device ahd # AHA39320/29320 and onboard AIC79xx devices #device amd # AMD 53C974 (Tekram DC-390(T)) #device isp # Qlogic family #device ispfw # Firmware for QLogic HBAs- normally a module #device mpt # LSI-Logic MPT-Fusion #device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') device trm # Tekram DC395U/UW/F DC315U adapters #device adv # Advansys SCSI adapters #device adw # Advansys wide SCSI adapters #device aha # Adaptec 154x SCSI adapters #device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. #device bt # Buslogic/Mylex MultiMaster SCSI adapters #device ncv # NCR 53C500 #device nsp # Workbit Ninja SCSI-3 #device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers interfaced to the SCSI subsystem #device amr # AMI MegaRAID #device arcmsr # Areca SATA II RAID #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device ciss # Compaq Smart RAID 5* #device dpt # DPT Smartcache III, IV - See NOTES for options #device hptmv # Highpoint RocketRAID 182x #device iir # Intel Integrated RAID #device ips # IBM (Adaptec) ServeRAID #device mly # Mylex AcceleRAID/eXtremeRAID #device twa # 3ware 9000 series PATA/SATA RAID # RAID controllers #device aac # Adaptec FSA RAID #device aacp # SCSI passthrough for aac (requires CAM) #device ida # Compaq Smart RAID #device mlx # Mylex DAC960 family #device pst # Promise Supertrak SX6000 #device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor device agp # support several AGP chipsets # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support #device cbb # cardbus (yenta) bridge #device pccard # PC Card (16-bit) bus #device cardbus # CardBus (32-bit) bus # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer #device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to the sio and/or ppc drivers): #device puc # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device em # Intel PRO/1000 adapter Gigabit Ethernet Card #device ixgb # Intel PRO/10GbE Ethernet Card #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support #device bfe # Broadcom BCM440x 10/100 Ethernet #device bge # Broadcom BCM570xx Gigabit Ethernet #device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device lge # Level 1 LXT1001 gigabit Ethernet #device nge # NatSemi DP83820 gigabit Ethernet #device nve # nVidia nForce MCP on-board Ethernet Networking #device pcn # AMD Am79C97x PCI 10/100(precedence over 'lnc') #device re # RealTek 8139C+/8169/8169S/8110S #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet #device ste # Sundance ST201 (D-Link DFE-550TX) #device ti # Alteon Networks Tigon I/II gigabit Ethernet #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') #device vge # VIA VT612x gigabit Ethernet #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. #device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards #device ex # Intel EtherExpress Pro/10 and Pro/10+ #device ep # Etherlink III based cards #device fe # Fujitsu MB8696x based cards #device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. #device lnc # NE2100, NE32-VL Lance Ethernet cards #device sn # SMC's 9000 series of Ethernet chips #device xe # Xircom pccard Ethernet # ISA devices that use the old ISA shims #device le # Wireless NIC cards #device wlan # 802.11 support #device an # Aironet 4500/4800 802.11 wireless NICs. #device awi # BayStack 660 and others #device ral # Ralink Technology RT2500 wireless NICs. #device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device sl # Kernel SLIP #device ppp # Kernel PPP #device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface #device ehci # EHCI PCI->USB interface (USB 2.0) #device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse #device ural # Ralink Technology RT2500USB wireless NICs #device urio # Diamond Rio 500 MP3 player #device uscanner # Scanners # USB Ethernet, requires miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet # FireWire support #device firewire # FireWire bus code #device sbp # SCSI over FireWire (Requires scbus and da) #device fwe # Ethernet over FireWire (non-standard!) # Omat saadot options INCLUDE_CONFIG_FILE options SMP # Symmetric MultiProcessor Kernel
_______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"