> On Mon, Dec 10, 2007 at 11:03:47AM +0200, Danny Braniss wrote: > > > On Sun, Dec 09, 2007 at 02:41:28PM +0200, Danny Braniss wrote: > > > > with this onboard NIC (LOB?) > > > > > > > > mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> > > > > e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 > > > > > > > > [EMAIL PROTECTED]:1:0:0: class=0x020000 card=0x81f81043 > chip=0x436411ab > > > > rev=0x12 hdr=0x00 > > > > vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' > > > > device = '88E8056 Yukon PCI-E Gigabit Ethernet Controller' > > > > class = network > > > > subclass = ethernet > > > > > > > > I'm getting allot of: > > > > msk0: watchdog timeout > > > > and > > > > mskc0: Tx descriptor error > > > > and > > > > msk0: link state changed to DOWN > > > > and > > > > msk0: link state changed to UP > > > > > > > > any help is most welcome, > > > > danny > > > > > > > > > > > > > > It seems that the issue happens only on 88E8056/88E1149 PHY. > > > See PR 116853 and 114631. > > > Sorry, I have no cluet yet. > > > > to add some more noise, this is the first host that panicked too :-) > > anything I can do to help? > > Probably ship the hardware to me? :) love to, but the hardware is not mine :-)
here is some more info, this is a different board, but with the same Marvell 88E8056, and it panics after printing 'no PHY found!' and the ethernet is -1 (ff.ff...) danny _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
