Julian Elischer wrote:
> it could be an old file..
> what kind of disks?
It's a Seagate ST3500630A parallel ATA drive.
> I had a scenario where 3ware controllers were just failing to write to
> a drive in the array, so old data showed through.
I have an Intel ICH4 controller - nothing unusual.
> the filesystem and the partitions and the raids all were on different
> alignments so teh only part of the system that had a boundary that
> aligned with the bad data was the physical stripes laid down by the
> controller. It was 64k stripes and 64k data missing, exactly on
> stripe boundaries. Due to the fact that FreeBSD had partitioned the
> drive staring at 63 blocks in, nothing else aligned with the problem.
Hmm, well this is a straight-forward disk situation - never used RAID on
this drive. Give what is happening, I wonder the changes of it being
HW, OS, or a filesystem issue.
-Joe
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
