At 09:29 AM 2/22/2008, Ken Smith wrote:

If those who experienced problems related to the hptrr driver update
could let us know one way or another whether or not you are still having
problems with it that would be appreciated.

Hi,
I just did a fresh test install with RC3 on a HighPoint hptrr controller with 2 disks in RAID1 config and all looks good.

hpoint# dmesg | grep hpt
hptrr: HPT RocketRAID controller driver v1.1 (Feb 20 2008 18:33:35)
hptrr0: <sx508x> port 0x2000-0x20ff mem 0x30100000-0x301fffff irq 16 at device 0.0 on pci1
hptrr: adapter at PCI 1:0:0, IRQ 16
hptrr: start channel [0,0]
hptrr: start channel [0,1]
hptrr: start channel [0,2]
hptrr: start channel [0,3]
hptrr: channel [0,2] started successfully
hptrr: channel [0,3] started successfully
hptrr: channel [0,0]: failed to perform Hard Reset
hptrr: channel [0,1]: failed to perform Hard Reset
hptrr0: [GIANT-LOCKED]
hptrr0: [ITHREAD]
da0 at hptrr0 bus 0 target 0 lun 0hpoint#

[EMAIL PROTECTED]:1:0:0: class=0x010000 card=0x11ab11ab chip=0x23101103 rev=0x02 hdr=0x00
    vendor     = 'Triones Technologies Inc. (HighPoint)'
    device     = 'RocketRAID 231x SATA Controller'
    class      = mass storage
    subclass   = SCSI
    cap 01[40] = powerspec 2  supports D0 D3  current D0
    cap 05[50] = MSI supports 1 message, 64 bit
    cap 10[60] = PCI-Express 1 legacy endpoint


hpoint# dd if=/dev/zero of=/tmp/junk bs=1024k count=100
100+0 records in
100+0 records out
104857600 bytes transferred in 1.415491 secs (74078613 bytes/sec)
hpoint#
hpoint# uname -a
FreeBSD hpoint.sentex.ca 7.0-RC3 FreeBSD 7.0-RC3 #0: Wed Feb 20 18:34:00 UTC 2008 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386
hpoint#


_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to