On Thu, Apr 17, 2008 at 02:02:51PM +0200, Ben Stuyts wrote: > On 17 apr 2008, at 13:20, Jeremy Chadwick wrote: >> On Thu, Apr 17, 2008 at 06:32:32PM +0900, [EMAIL PROTECTED] wrote: >>> I am running 7-STABLE with machines that are net booted. On occasion, >>> that is not with any level of predictability, this happens: >>> >>> em0: Hardware Initialization Failed >>> em0: Unable to initialize the hardware >>> >>> which of course stops the machine in its tracks. A normal dmesg is >>> also included. >>> >>> Any steps I should take to help debug this? >> >> George, can you provide the following? >> >> * Motherboard type and model (a URL to the board would be good) >> * kenv | grep smbios >> * pciconf -lv > > I have seen this too. A couple of times on a new server here. Maybe one in > two or three reboots. So far, it only happens after a reboot, but not after > a hard reset or power cycle. This board has 3 em network if's. Two on the > board itself, and one on a daughter card on the ipmi add-on card. It is > always em0 that is giving trouble. The board is a Supermicro X7DBP-i: > <http://www.supermicro.com/products/motherboard/xeon1333/5000P/X7DBP-i.cfm>
I'm wondering if the IPMI add-on is what's doing it. However, the IPMI cards compatible with the X7DBP all have a dedicated NIC (versus piggybacking on top of the existing mainboards' NICs, which almost always causes problems of the mysterious sort). I'm not sure, but I don't think em0 will be that NIC. Both you and George have boards that use the 82563EB. jv@ will have to help with this one. I wonder if it's a BIOS bug of some kind, where something on the NIC isn't getting reset by the BIOS on a soft boot... -- | Jeremy Chadwick jdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB | _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"