> Hasn't anyone really noticed yet that em(4) only appears when you boot > FreeBSD with the interface physically attached to a switch for example? > If you attach it later, after boot up, the interface won't power up and > appear in the interface list (ifconfig)?
I'm afraid I don't see your problem at all. My em interfaces appear as they should, even if not connected to a switch. And when I connect an em interface to a switch, I get link and things work as expected. > Steps to reproduce: > 1) Switch your PC/laptop off. Really OFF, no reboot. > 2) Disconnect the em(4) NIC from your switch. > 3) Boot FreeBSD. > 4) Plug in the ethernet cable. > 5) Tataa! All leds at the NIC stay off. You won't be able to use em(4) > unless you reboot your machine. > > Something is not being initialized properly on em(4) devices, it seems. This may well be the case - but not that the em driver handles several different chip models. You may have a problem which is specific to one or a few chip models. Steinar Haug, Nethelp consulting, [EMAIL PROTECTED] _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"