At 08:22 AM 10/9/2008, Andrew D wrote:
Hi Fellow Node user :),
I have the same + similar issue.
Hi,
What about adding
disable iface-alias
iface-alias
Default: Enabled if -nat is specified. This option simply tells
ppp to add new interface addresses to the interface rather than
replacing them. The option can only be enabled if network
address translation is enabled (``nat enable yes'').
With this option enabled, ppp will pass traffic for old interface
addresses through the NAT engine (see libalias(3)), resulting in
the ability (in -auto mode) to properly connect the process that
caused the PPP link to come up in the first place.
Disabling NAT with ``nat enable no'' will also disable
`iface-alias'.
Daniel O'Connor wrote:
Hi,
I am using userland PPP to do PPPoE and I am finding that it isn't
deleting the old IP from tun0 when the link goes down, eg
Oct 9 22:00:01 midget ppp[53728]: tun0: Phase: deflink: logout -> hangup
Oct 9 22:00:01 midget ppp[53728]: tun0: Phase: deflink: Connect
time: 950 secs: 2711068 octets in, 39993514 octets out
[midget 22:00] ~ >ifconfig tun0
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1500
inet 121.45.251.180 --> 203.16.215.184 netmask 0xffffffff
Opened by PID 53728
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1492
inet 121.45.215.128 --> 203.16.215.183 netmask 0xffffffff
inet 121.45.69.26 --> 203.16.215.186 netmask 0xffffffff
Opened by PID 90863
The second line only shows up when the gateway is different between
IP assignments from the ISP. I have no idea if this blocks access to
the previous IP, not that it's a major issue.
uname -a
FreeBSD gateway.abdulla 7.0-STABLE FreeBSD 7.0-STABLE #1: Sat Jun 21
03:10:37 CST 2008 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/MYKERN i386
My ppp setup is almost the same.
Cheers
cya
Andrew
I have the following config..
default:
set device /dev/cuaa0
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT \
OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
set speed 115200
set ctsrts on
set server /var/run/ppp/tun%d foobar
set urgent tcp 22
set urgent udp 27010 27011 27012 27013 27014 27015 27016 27017
27018 27019 27020 27960 14577 14578 14579 14580
set log Phase Chat IPCP CCP tun command connect
internode:
set device PPPoE:em0
set ifaddr 0.0.0.0/0 0.0.0.0/0
resolv readonly
disable pap
enable dns
set cd 5
set dial
set login
set redial 5+30-120 0
enable lqr
enable echo
set lqrperiod 3
set reconnect 10 100000
set authname username
set authkey password
add default HISADDR
I don't have any linkup/linkdown scripts..
Any one have an idea why this would be happening?
System is a FreeBSD midget.dons.net.au 7.0-STABLE FreeBSD
7.0-STABLE #1: Sun Jun 1 19:20:18 CST
2008 [EMAIL PROTECTED]:/data/obj/data/src/sys/GENERIC i386
Thanks.
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
