On Friday 24 October 2008 02:48:13 pm Jo Rhett wrote: > So I booted up by CD and used Fixit mode to switch the system to boot > via serial (keyboard detached), but this gathered me even less. > > /boot.config: -Dh > Consoles: internal video/keyboard serial port > BIOS drive A: is disk0 > BIOS drive C: is disk1 > BIOS drive D: is disk2 > BIOS 639kB/4062144kB available memory > > FreeBSD/i386 bootstrap loader, Revision 1.1 > ([EMAIL PROTECTED] > > Plugging back in the monitor after lockup showed only a single char > more: > ([EMAIL PROTECTED]
This confirms it is hanging in one of the two BIOS routines to output a character. One thing you can do would be to boot up and do the following: dd if=/dev/mem bs=0x400 count=1 of=idt.out dd if=/dev/mem bs=64k iseek=15 count=1 of=bios.out Then place those files some place I can fetch them. You might also play with any BIOS settings you have for serial console redirection to see if they make a difference. -- John Baldwin _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"