>Number: 95173 >Category: usb >Synopsis: [usb] cannot mount external usb harddisk VIA Technologies Inc. >USB 2.0 IDE Bridge >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-usb >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Fri Mar 31 23:00:36 GMT 2006 >Closed-Date: >Last-Modified: >Originator: Goegele Hannes >Release: 5.5-PRERELEASE >Organization: >Environment: FreeBSD localhost 5.5-PRERELEASE FreeBSD 5.5-PRERELEASE #1: Sun Feb 5 17:26:01 CET 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/DESKTOPBSD i386 >Description: I bought an external 2,5 USB-Harddisk-Adapter and it's not possible to mount the disk (5 GB Fat32). The adapter and harddisk are OK and both are working well under W2K and Windows XP. Here is the kernel output:
umass0: VIA Technologies Inc. USB 2.0 IDE Bridge, rev 2.00/0.03, addr 2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <IBM-DJSA -205 JS1O> Fixed Direct Access SCSI-2 device da0: 1.000MB/s transfers da0: 4769MB (9767520 512 byte sectors: 255H 63S/T 608C) umass0: Invalid CSW: tag 7 should be 8 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x10, scsi status == 0x0 Opened disk da0 -> 5 Opened disk da0 -> 5 Opened disk da0 -> 5 Opened disk da0 -> 5 If i try to mount the disk with "mount -t msdos /dev/da0 /mnt/" the following error message appears: "msdosfs: /dev/da0: Input/output error" "usbdevs -v" gives me Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 addr 2: full speed, power 100 mA, config 2, USB 2.0 IDE Bridge(0x6204), VIA Technologies Inc.(0x040d), rev 0.03 >How-To-Repeat: Plug in the adapter in the usb-port. >Fix: >Release-Note: >Audit-Trail: >Unformatted: _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[EMAIL PROTECTED]"